1780 ADAFRUIT

Document overview

  • PDF pages: 2

Technical content

Page 1

Audio Adapter Board for Teensy 3.0 - 3.2, 3.5

and 3.6

PRODUCT ID: 1780

PDF page 1 diagram

 Description

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.

The audio chip connects to Teensy v3 using 7 signals. The I2C pins SDA and SCL are used to control the chip and adjust parameters. Audio data uses I2S signals, TX (to headphones and/or line out) and RX (from line in or mic), and 3 clocks, LRCLK (44.1 kHz), BCLK (1.41 MHz) and MCLK (11.29 MHz). All 3 clocks are created by Teensy 3.1. The SGTL5000 chip operates in "slave mode", where all its clock pins are inputs.

Page 2

As of February 23rd, 2015 we are shipping an updated version with a few minor changes.

This product does NOT include a Teensy, it's just the audio adapter!

 Technical Details

Dimensions:

o 35mm x 37mm x 2mm / 1.4" x 1.5" x .08" o Height with Jack: 6.7mm o Weight: 4.9g

Revision History:

o As of February 23rd, 2015 we are shipping an updated version with a few minor changes:  1. Pullup resistors are added for the SD card and optional SPI flash chip (the empty 8-pin location on the bottom side).  2. The values of some capacitors are increased, to allow for better signals at sub-audible frequencies.  3. A few locations are added to cut and join traces, to reconfigure the board to nonstandard wiring.

o The new version is 100% compatible with the software and exactly the same form factor!

Engineered in NYC Adafruit ® https://www.adafruit.com/product/1780 6‐23‐17