EE-SX4009-P1_V01 OMRON
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
Opto–Switch EE–SX4009–P1 Transmissive Incorporates a photo–IC chip with a built-in detector element and amplifier. Incorporates a detector element with a built–in temperature compensation circuit. Easy to install with screw fixing. Connects to Omron EE–1005 and AMP’s EI series connectors. Dimensions Internal Circuit Dimensions Tolerance 4 mm max. ±0.2 4 /C0116 mm 16 ±0.3 16 /C0116 mm 63 ±0.5 Unless otherwise specified, the tolerances are as shown below. Terminal No. Name V Supply voltage (Vcc) O Output (OUT) G Ground (GND) V G O Recommended Connectors: Japan AMP 171822-3 (crimp-type connector) 172142-3 (crimp-type connector) OMRON EE-1005 (with harness) Optical axis 171825-3 (Japan AMP) 3±0.1 dia, depth: 2 0.5 (slit width)Two, R1 4.2±0.2 dia. hole 4 0 –0.1 dia. 23±0.2 10.5 7.5 Specifications Absolute Maximum Ratings (Ta = 25°C) Item Symbol Rated value Supply voltage VCC 10 V Output voltage VOUT 28 V Output current IOUT 16 mA Permissible output dissipation POUT 250 mW (see note) Operating temperature Topr –25°C to 75°C Storage temperature Tstg –40°C to 85°C Soldering temperature Tsol --- Note: Refer to the temperature rating chart if the ambient temperature exceeds 25°C.
Electrical and Optical Characteristics (Ta = 25°C) Item Symbol Value Condition Current consumption ICC 3.0 mA max. With and without incident Low-level output voltage VOL 0.3 V max. IOUT = 16 mA with incident High-level output voltage VOH (VCC x 0.9) V min. VOUT = VCC without incident, RL = 47 kΩ Response frequency f 3 kHz min. VOUT = VCC , RL = 47 kΩ (see note) Note: The value of the response frequency is measured by ro- tating the disk as shown below. 2.1 mm 0.5 mm0.5 mm t = 0.2 mm Disk Engineering Data Output Allowable Dissipation vs. Ambient Temperature Characteristics Ambient temperature Ta (°C) Sensing Position Characteristics (Typical) Output allowable dissipation Pc (mW) Output transistor Distance d (mm) Center of optical axis Light interrupting plate d1 = 0±0.3 mm V CC = 5 V, Ta = 25°C R L = 47 kΩ EE-1005 Connector (1) (2) (3) 1,000±20 No. Name Model Quantity Maker