1701013

1701013 PHOENIX

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 12

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. PCB terminal block, nominal current: 17.5 A, rated voltage (III/2): 400 V, nominal cross section: 1.5 mm2, number of potentials: 17, number of rows: 1, number of positions per row: 17, product range: MKDSN 1,5, pitch: 5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, Pin layout: Linear pinning, Solder pin [P]: 3.5 mm, number of solder pins per potential: 1, type of packaging: packed in cardboard Your advantages Well-known connection principle allows worldwide use• Low temperature rise, thanks to maximum contact force Allows connection of two conductors Extremely small design for the respective conductor cross section The latching on the side enables various numbers of positions to be combined Commercial data Item number 1701013 Packing unit 20 pc Minimum order quantity 20 pc Note Made to order (non-returnable) Product key AALFHC GTIN 4046356511070 Weight per piece (including packing) 15.768 g Weight per piece (excluding packing) 15.768 g Country of origin DE MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 1 (12)

Product line COMBICON Terminals S Product type Printed circuit board terminal Product family MKDSN 1,5 Number of positions 17 Pitch 5 mm Number of connections 17 Number of rows 1 Number of potentials 17 Pin layout Linear pinning Solder pins per potential 1 Electrical properties Nominal current IN 17.5 A Nominal voltage UN 400 V Degree of pollution 3 Rated voltage (III/3) 250 V Rated surge voltage (III/3) 4 kV Rated voltage (III/2) 400 V Rated surge voltage (III/2) 4 kV Rated voltage (II/2) 630 V Rated surge voltage (II/2) 4 kV Connection data Connection technology Type PC termination block Nominal cross section 1.5 mm² Conductor connection Connection method Screw connection with tension sleeve Conductor cross section AWG 26 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 2 (12)

ferrule with plastic sleeve Stripping length 6 mm Mounting Mounting type Wave soldering Pin layout Linear pinning Drive form screw head Slotted (L) Connection method Screw connection with tension sleeve Drive form screw head Slotted (L) Material specifications Material data - contact Note WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 Contact material Cu alloy Surface characteristics Tin-plated Metal surface terminal point (top layer) Tin (5 - 7 µm Sn) Metal surface terminal point (middle layer) Nickel (2 - 3 µm Ni) Metal surface soldering area (top layer) Tin (5 - 7 µm Sn) Metal surface soldering area (middle layer) Nickel (2 - 3 µm Ni) Material data - housing Color (Housing) green (6021) Insulating material PA Insulating material group I CTI according to IEC 60112 600 Flammability rating according to UL 94 V0 Glow wire flammability index GWFI according to EN 60695-2-12 850 Glow wire ignition temperature GWIT according to EN 60695-2- 775 Temperature for the ball pressure test according to EN 60695- 10-2 125 °C Notes Note on application For safe conductor connection, always adhere to a defined tightening torque. Particularly in the case of PCB terminal blocks with two or three positions, the individual solder pin for each contact point cannot compensate for this. That is why the terminal blocks must be supported during conductor connection (held with one hand, support on the housing). Dimensions MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 3 (12)

Width [w] 85 mm Height [h] 13.5 mm Length [l] 8.1 mm Installed height 10 mm Solder pin length [P] 3.5 mm Pin dimensions 0.5 x 1 mm PCB design Pin spacing 5 mm Hole diameter 1.3 mm Mechanical tests Test for conductor damage and slackening Specification IEC 60999-1:1999-11 Result Test passed Pull-out test Specification IEC 60999-1:1999-11 0.14 mm² / solid / > 10 N 0.14 mm² / flexible / > 10 N 1.5 mm² / solid / > 40 N Conductor cross section/conductor type/tractive force setpoint/actual value 1.5 mm² / flexible / > 40 N Electrical tests Temperature-rise test Specification IEC 60947-7-4:2019-01 Requirement temperature-rise test The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. Short-time withstand current Specification IEC 60947-7-4:2013-08 Insulation resistance Specification IEC 60512-3-1:2002-02 Insulation resistance, neighboring positions > 5 MΩ Air clearances and creepage distances | Specification IEC 60947-1:2007-06 + A1:2010-12 + A2:2014-09 MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 4 (12)

Insulating material group I Comparative tracking index (IEC 60112) CTI 600 Rated insulation voltage (III/3) 250 V Rated surge voltage (III/3) 4 kV minimum clearance value - non-homogenous field (III/3) 3 mm minimum creepage distance (III/3) 3.2 mm Note on connection cross section With connected conductor 1.5 mm² (solid). Rated insulation voltage (III/2) 400 V Rated surge voltage (III/2) 4 kV minimum clearance value - non-homogenous field (III/2) 3 mm minimum creepage distance (III/2) 3 mm Rated insulation voltage (II/2) 630 V Rated surge voltage (II/2) 4 kV minimum clearance value - non-homogenous field (II/2) 3 mm minimum creepage distance (II/2) 3.2 mm Environmental and real-life conditions Vibration test Specification IEC 60068-2-6:2007-12 Frequency 10 - 150 - 10 Hz Sweep speed 1 octave/min Sweep speed 5g (60.1 Hz ... 150 Hz) Test duration per axis 2.5 h Glow-wire test Specification IEC 60695-2-10:2013-04 Temperature 850 °C Time of exposure 5 s Aging Specification IEC 60947-7-4:2013-08 Ambient conditions Ambient temperature (operation) -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) Ambient temperature (storage/transport) -40 °C ... 70 °C Relative humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 100 °C Packaging specifications Type of packaging packed in cardboard MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 5 (12)

Drilling plan/solder pad geometry a 4,05 1,3 2,5 Diagram 0 10 20 30 40 50 60 70 80 90 100 110 I [A]  [°C] = 1,5 mm²1 Type: MKDSN 1,5/... MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 6 (12)

8,1 4,05 a+5 a 2,55 MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 7 (12)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1701013  cULus Recognized Approval ID: E60425-19770427 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 Use group B Multi-conductor connection

300 V 10 A 2X - 18 -

Screw connection 300 V 10 A 30 - 14 - Use group D Multi-conductor connection Screw connection 300 V 10 A 30 - 14 -  DNV GL Approval ID: TAE00001EV  VDE Zeichengenehmigung Approval ID: 40055535 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 400 V 17.5 A - 0.2 - 1.5 MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 8 (12)

ECLASS-11.0 27460101 ECLASS-12.0 27460101 ECLASS-13.0 27460101 ETIM ETIM 8.0 EC002643 UNSPSC UNSPSC 21.0 39121400 MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 9 (12)

Environmental product compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 10 (12)

SZS 0,6X3,5 - Screwdriver 1205053 https://www.phoenixcontact.com/us/products/1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip SK 5/3,8:FORTL.ZAHLEN - Marker card 0804183 https://www.phoenixcontact.com/us/products/0804183 etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 11 (12)

SK 5/3,8:UNBEDRUCKT - Marker card 0805409 https://www.phoenixcontact.com/us/products/0805409 Marker card, white, unlabeled, can be labeled with: Marker pen: without print, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm, Number of individual labels: 120 Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com MKDSN 1,5/17 - PCB terminal block 1701013 https://www.phoenixcontact.com/us/products/1701013 Oct 10, 2023, 7:03 AM Page 12 (12)