1625800 TURCK
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
Features
■Rectangular, height 40 mm ■Variable orientation of active face in 5 directions ■Plastic, PBT‐GF30‐V0 ■High luminance corner LEDs ■Optimum view on supply voltage and switching state from any position ■Factor 1 for all metals ■Increased switching distance ■Protection class IP68 ■Resistant to magnetic fields ■Extended temperature range ■High switching frequency ■Auto-compensation protects against pre- damping ■DC 3-wire, 10…30 VDC ■NO contact, PNP output ■M12 x 1 male connector Wiring diagram
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 2|3 NI35U-CK40-AP6X2-H1141 | 11/07/2023 13-09 | technical changes reserved Technical data Switching frequency 0.25 kHz Mechanical data Design Rectangular, CK40 Dimensions 65 x 40 x 40 mm variable orientation of active face in 5 directions Housing material Plastic, PBT-GF20-V0, Black Active area material Plastic, PA12-GF30, yellow Electrical connection Connector, M12 × 1 Environmental conditions Ambient temperature -30…+85 °C Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP68 MTTF 874 years acc. to SN 29500 (Ed. 99) 40 Power-on indication 2 × LEDs, Green Switching state 2 × LEDs, Yellow Included in delivery Fixing clamp BS4-CK40 Functional principle Inductive sensors are designed for wear-free and contactless detection of metal objects. uprox Factor 1 sensors have significant advantages due to their patented ferrite- coreless multi-coil system. They detect all metals at the same large switching distance and are resistant to magnetic fields. Mounting instructions Mounting instructions/Description Distance D 120 mm Distance W 105 mm Distance T 140 mm Distance S 60 mm Distance G 210 mm Distance N 30 mm Width active area B 40 mm Flush mounting 1‐side mounting: Sr = 28 mm 2‐side mounting: Sr = 24 mm 3‐side mounting: Sr = 19 mm Backside mounting with full switching distance. Recessed mounting with reduced switching distance. The values stated relate to a 1 mm thick steel plate.
TURCK Inc. | 3000 Campus Drive Minneapolis, MN 55441-2656 | Phone: 763-553-7300 | Application Support: 1-800-544-7769 | Fax 763-553-0708 | www.turck.com 3|3 NI35U-CK40-AP6X2-H1141 | 11/07/2023 13-09 | technical changes reserved Accessories BSS-CP40 6901318 Mounting clamp for rectangular housings 40 x 40 mm; material: Polypropylene Wiring accessories Dimension drawing Type ID RKC4T-2/TEL 6625010 Connection cable, M12 female connector, straight, 3-pin, cable length: 2 m, jacket material: PVC, black; cULus approval