1623330 PHOENIX

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 8

Technical content

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 1 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Cable connector, SB, straight long, shielded: yes, SPEEDCON locking, M40, No. of pos.: 8+4+PE, Direction of rotation: Standard, type of contact: Socket, Crimp connection, cable diameter range: 14 mm ... 20.5 mm, coding:Signal, coding 1 Your advantages All housing can be fitted with pin or socket contacts A total of eight contacts are available for signal transmission Reduced connection time with SPEEDCON fast locking system Mechanical coding reliably prevents incorrect connections Safe use in the field, thanks to high degree of protection Consistent EMC protection for reliable connection solutions in the industrial environment Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626194059 Technical data Temperature range Ambient temperature -40 °C ... 115 °C (see derating curve) Standards and Regulations Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 2 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Technical data Standards and Regulations relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.

  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded applicable when combining several circuits in a cable and/or connector
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Data of the insulating body Protection against electric shock IEC 61984 Coding Signal, coding 1 Contact connection method Crimp connection Type of contacts Socket Application Hybrid Number of positions 13 Direction of rotation Standard Contact diameter of power contacts 3.6 mm Litz wire cross section of power contacts min. 1 mm² Litz wire cross section of power contacts max. 16 mm²

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 3 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Technical data Data of the insulating body Rated current for power contacts 70 A Note for max. connection cross section Rated voltage 630 V AC Rated surge voltage 6 kV Overvoltage category III Degree of pollution 3 Rated voltage (II/3) power contact 850 V DC Rated voltage (III/3) power contact 630 V AC Contact diameter of signal contacts 1 mm Litz wire cross section of signal contacts min. 0.06 mm² Litz wire cross section of signal contacts max. 1.5 mm² Nominal current per signal contact 8 A Note for max. connection cross section Rated surge voltage 6 kV Rated voltage (III/3) signal contact 500 V Contact diameter, data contacts 1 mm Litz wire cross section, data contacts, min. 0.06 mm² Litz wire cross section, data contacts, max. 1.5 mm² Rated current of each data contact at 25°C 8 A Note for max. connection cross section Rated surge voltage 1.5 kV Installation height 2000 m Housing data Housing material Turned parts: copper zinc alloy (CuZn), die-cast parts: zinc (GD-Zn) Type of locking SPEEDCON locking Degree of protection (when plugged in) IP68/IP69K Thread type M40 Cable seal data Cable diameter 14 mm ... 20.5 mm Sealing material FKM Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 4 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Schematic diagram A BC D 7 856 Pin assignment of socket signal, coding 1 Diagram 0 10 20 30 40 50 60 70 80 90 100 110 I [A]  [°C] = 3x16 mm 120 I = current strength, ϑ = ambient temperature, power contacts A–C: 3x up to 70 A, signal contacts: 4x 2 A constant, data contacts: no load Dimensional drawing Pin version: dimension A = 4.05 mm, socket version: dimension A = 0.4 mm Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 11.0 27440102 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27260700 eCl@ss 7.0 27440102 eCl@ss 9.0 27440102 ETIM ETIM 7.0 EC002635 UNSPSC UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 5 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC B.01687 Accessories Accessories Crimp contact Crimp contact - ST-10KS010 - 1618239 Crimp contact - ST-10KS035 - 1618464 Crimp contact, turned, contact diameter: 1 mm, crimp range: 0.25 mm² ... 1 mm² Crimp contact - SB-10KS001 - 1623603

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 6 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Accessories Crimp contact - SB-10KS002 - 1623604 Crimp contact - SB-10KS003 - 1623605 Crimp contact, turned, contact diameter: 1 mm, crimp range: 0.5 mm² ... 1 mm² Crimp contact - SB-10KS004 - 1623606 Crimp contact, turned, contact diameter: 1 mm, crimp range: 1 mm² ... 1.5 mm² Crimp contact - SB-36KS002 - 1623378 Crimp contact - SB-36KS003 - 1623379 Crimp contact, turned, Single contact, contact diameter: 3.6 mm, crimp range: 4 mm² ... 6 mm²

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 7 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Accessories Crimp contact - SB-36KS004 - 1623380 Crimp contact, turned, Single contact, contact diameter: 3.6 mm, crimp range: 10 mm² ... 10 mm² Crimp contact - SB-36KS005 - 1623381 Crimp contact, turned, Single contact, contact diameter: 3.6 mm, crimp range: 16 mm² ... 16 mm² Mounting material Square mounting flange with O-ring - SM-Z0003 - 1607935 Square mounting flange with O-ring, Axial O-ring, 4x Ø4,2 Square mounting flange - SM-Z0004 - 1607937 Square mounting flange, 4x Ø4,2 Color-coding - SM-Z0025 - 1620558 Color-coding, color: green

https://www.phoenixcontact.com/pi/products/1623330 02/04/2022 Page 8 / 8 Cable connector - SB-8ESSA8A8L33S - 1623330 Accessories Color-coding - SM-Z0026 - 1620559 Color-coding, color: orange Color-coding - SM-Z0027 - 1620560 Color-coding, color: black Protective cover Protective cap - SM-Z0031 - 1624199 Plastic protection cap for connectors with M40 SPEEDCON knurled nut Phoenix Contact 2022 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com