1620409 PHOENIX

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 13

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Connector in molded plastic on both sides, series: KSF, M23-Socket, Straight, plastic molded, number of positions: 4+3+PE, type of locking: Screw locking mechanism, on M23-Pin, Straight, plastic molded, number of positions: 4+3+PE, cable length: 2 m, shielded: yes, color of outer sheath: orange RAL 2003 Your advantages Our standard: robust halogen-free PUR cable• Simple and safe: 100% electrically tested and assembled ready for use Designs with preassembled cables on one or both sides High flexibility: customer-specific assemblies and cable lengths can be supplied Commercial data Item number 1620409 Packing unit 1 pc Minimum order quantity 1 pc Note Made to order (non-returnable) Sales key AB34 Product key ABRDEG Catalog page Page 222 (C-2-2019) GTIN 4046356831642 Weight per piece (including packing) 659 g Weight per piece (excluding packing) 613.163 g Customs tariff number 85444290 Country of origin DE K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 1 (13)

Notes on operation Observe derating curve. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the Safety note K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 2 (13)

ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Signal and power cable Connector Connector specifications Type Straight, plastic molded Thread type M23 Type of locking Screw locking mechanism Degree of protection IP67, when in locked state No. of pos. 4+3+PE Direction of rotation Standard Contact switching type Socket Insertion/withdrawal cycles 50 Contact resistance < 0.3 mΩ Max. current 30 A Voltage 630 V Overvoltage category III Degree of pollution 3 Rated surge voltage 6 kV Ambient temperature (operation) -40 °C ... 105 °C Cable specifications Cable type PSLC11Y-J Shielded yes Cable structure 4 x 1.5 mm² + 2 x 2 x 0.75 mm² StC Cable structure (AWG) 16 AWG/4c + 19 AWG/2pr External cable diameter 11.70 mm Outer sheath, material PUR Material wire insulation TPM External sheath, color orange RAL 2003 Nominal voltage, cable 1000 V Test voltage 4 kV (2 kV signal) Rated current 18 A Smallest bending radius, movable installation 117 mm -40 °C ... 80 °CAmbient temperature (operation) for fixed installation -20 °C ... 60 °C Connector specifications (second page) Type Straight, plastic molded Housing material Zinc die-cast K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 3 (13)

Degree of protection IP67, when in locked state No. of pos. 4+3+PE Direction of rotation Standard Contact switching type Pin Insertion/withdrawal cycles 50 Contact resistance < 0.3 mΩ Max. current 30 A Voltage 630 V Overvoltage category III Degree of pollution 3 Rated surge voltage 6 kV Ambient temperature (operation) -40 °C ... 105 °C Cable/line Cable length 2 m K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 4 (13)

D CB A Pin assignment of pin Dimensional drawing M23x1Ø28,3 ≈98,3 Dimensional drawing K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 5 (13)

0 10 20 30 40 50 60 70 80 90 I [A]  [°C] = 4x1,5 mm + 2x2x0,75 mm I = current strength, T = ambient temperature Dimensional drawing M23x1 ≈103,3 Dimensional drawing K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 6 (13)

A B C D Socket pin assignment Circuit diagram PE PE AA BK1 GN/YE BK2 BK3 BK5 BK6 BK7 BB CC DD 1,5mm 1,5mm BK8 0,75mm 0,75mm 1,5mm 1,5mm 0,75mm 0,75mm K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 7 (13)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1620409  EAC Approval ID: B.00286/19 K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 8 (13)

ECLASS-11.0 27060106 ECLASS-12.0 27060106 ECLASS-13.0 27060106 ETIM ETIM 9.0 EC003250 UNSPSC UNSPSC 21.0 26121600 K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 9 (13)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(b), 6(b)-II, 6(c) China RoHS EFUP-50Environment friendly use period (EFUP) An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 97cfdce1-40b2-4d3a-9ce1-f6ae9832501c K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 10 (13)

https://www.phoenixcontact.com/us/products/1013151 Insert label, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: slide-on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20 PABA YE/15 - Insert label 1013698 https://www.phoenixcontact.com/us/products/1013698 Insert label, Strip, yellow, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: slide-on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20 K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 11 (13)

https://www.phoenixcontact.com/us/products/1013944 Insert label, Strip, red, unlabeled, can be labeled with: CMS-P1-PLOTTER, mounting type: slide-on, cable diameter range: 0.6 ... 50 mm, lettering field size: 15 x 4 mm, Number of individual labels: 20 B-STIFT - Marker pen 1051993 https://www.phoenixcontact.com/us/products/1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 12 (13)

CUTFOX-S VDE - Diagonal cutter 1212207 https://www.phoenixcontact.com/us/products/1212207 Diagonal cutter for hard (piano wire) and soft wires, VDE 1000 V AC/1500 V DC tested Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com K-7E-M23 M9/2,0-D02/M23 F8 - Connector in molded plastic on both sides 1620409 https://www.phoenixcontact.com/us/products/1620409 Jul 2, 2024, 5:13 AM Page 13 (13)