1607506 PHOENIX
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 8
Technical content
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Coupler connector, straight, Screw locking mechanism, M58, number of positions: 4+3+PE, contact connection type: Pin, shielded: yes, degree of protection: IP67, cable diameter range: 17 mm ... 25 mm, number of positions: 8, connection method: Crimp connection, series: SL Your advantages Consistent EMC protection for reliable connection solutions in the industrial environment• Crimping connection: vibration- and temperature-resistant assembly Reliable transmission of high electrical power Commercial data Item number 1607506 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB32 Product key ABRBHG Catalog page Page 174 (C-2-2019) GTIN 4046356271707 Weight per piece (including packing) 738.48 g Weight per piece (excluding packing) 738.48 g Customs tariff number 85366990 Country of origin DE SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 1 (8)
Order information: Order crimp contacts 4 x Ø 1.6 mm, 4 x Ø 10 mm separately Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
- WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
- WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
- The products are suitable for applications in plant, controller, and electrical device engineering.
- When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
- Assembled products may not be manipulated or improperly opened.
- Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
- When using the product in direct connection with third-party manufacturers, the user is responsible.
- For operating voltages > 50 V AC, conductive connector housings must be grounded
- Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
- Only use tools recommended by Phoenix Contact
- The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
- Operate the connector only when it is fully plugged in and interlocked.
- Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
- Observe the minimum bending radius of the cable. Lay the cable without twisting it.
- The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting Safety note SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 2 (8)
warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Circular connector (cable-side) Series SL Application Power Number of positions 8 Connection profile 4+3+PE Shielded yes Coding N Thread type M58 Data management status Article revision 06 Material specifications Seal material FPM Housing material Metal Housing material Aluminum Insulator material PA 6.6 Gasket and O-ring material FPM Connection data Conductor connection Connection method Crimp connection Electrical properties Contact Contact diameter 10 mm Max. current 150 A Nominal voltage UN 630 V Overvoltage category III Degree of pollution 3 Rated surge voltage 6 kV Contact Contact diameter 1.6 mm Max. current 12 A Nominal voltage UN 250 V Overvoltage category III Degree of pollution 3 Rated surge voltage 4 kV Connector Type straight SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 3 (8)
External cable diameter 17 mm ... 25 mm Environmental and real-life conditions Ambient conditions Degree of protection IP67 Ambient temperature (operation) -40 °C ... 120 °C Altitude 2000 m SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 4 (8)
V WU - + Connector pin assignment Diagram 100 120 140 160 180 200 0 10 20 30 40 50 60 70 80 90 100 110 120130 I [A] [°C] = 3x50 mm I = current strength, T = ambient temperature SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 5 (8)
164,5 5555 Dimensional drawing SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 6 (8)
ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 7 (8)
Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(b), 6(b)-II, 6(c) China RoHS EFUP-50Environment friendly use period (EFUP) An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 5267a6bf-0edb-4255-8273-b82872a59af5 Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SL-7EP1N8A9002 - Coupler connector 1607506 https://www.phoenixcontact.com/us/products/1607506 Oct 29, 2024, 8:03 AM Page 8 (8)