15TQ060S

15TQ060_06 IRF

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 7

Technical content

Major Ratings and Characteristics IF(AV) Rectangular 15 A waveform VRRM 60 V IFSM @ tp = 5 μs sine 1000 A VF @ 15 Apk, TJ = 125°C 0.56 V TJ range - 55 to 150 °C Characteristics Values Units Description/Features The 15TQ060 Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling di- odes, and reverse battery protection. 150° C T J operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability SCHOTTKY RECTIFIER 15 Amp 15TQ060 15TQ060S Bulletin PD-20563 rev. B 06/06 1www.irf.com Case Styles 15TQ060 15TQ060S TO-220AC Anode 1 3 Cathode Base Cathode D2PAK Anode 1 3 Base Cathode N/C IF(AV) = 15 Amp VR = 60V

15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 www.irf.com Part number 15TQ060 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings IF(AV) Max. Average Forward Current 15 A 50% duty cycle @ T C = 104° C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 1000 5 μs Sine or 3μs Rect. pulse Surge Current * See Fig. 7 260 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 6 mJ T J = 25 °C, IAS = 1.50 Amps, L = 11.5 mH IAR Repetitive Avalanche Current 1.50 A Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Parameters 15TQ Units Conditions A Absolute Maximum Ratings VFM Max. Forward Voltage Drop (1) 0.62 V @ 15A * See Fig. 1 0.82 V @ 30A

0.56 V @ 15A

0.71 V @ 30A

IRM Max. Reverse Leakage Current (1) 0.80 mA T J = 25 °C * See Fig. 2 45 mA T J = 125 °C CT Max. Junction Capacitance 720 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated VR) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications Parameters 15TQ Units Conditions TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 3.25 °C/W DC operation * See Fig. 4 to Case RthCS Typical Thermal Resistance, Case to 0.50 °C/W Mounting surface , smooth and greased Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Marking Device 15TQ060 Case Style TO-220 15TQ060S Case Style D 2Pak Kg-cm (Ibf-in) Thermal-Mechanical Specifications Parameters 15TQ Units Conditions (1) Pulse Width < 300μs, Duty Cycle < 2% Following any rated load condition and with rated VRRM applied

15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 1000 0 0.4 0.8 1.2 1.6 2 Instantaneous Forward Current - I (A)F FM T = 150°C T = 125°C T = 25°C J J J Forward Voltage Drop - V (V) 0.001 0.01 0.1 100 1000 0 1 02 03 04 05 06 0 R R 125°C 100°C 75°C 50°C 25°C Reverse Current - I (mA) T = 150°CJ Reverse Voltage - V (V) 100 1000 0 1 02 03 04 05 06 0 R T Reverse Voltage - V (V) Junction Capacitance - C (pF) T = 25°CJ t 1, Rectangular Pulse Duration (Seconds) Thermal Impedance - Z thJC (°C/W) 0.001 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc PDM

15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current FREE- WHEEL DIODE 40HF L40S02CU R R E NT MONIT OR HIGH-S PEED S WIT CHIRFP460 L DUT Rg = 25 o h m Vd = 25 Volt+ 100 110 120 130 140 150 0 5 10 15 20 25 DC Allowable Case Temperature - (°C) F(AV) see note (2) Square wave (D = 0.50) 80% Rated V appliedR Average Forward Current - I (A) 100 1000 10 100 1000 10000 FSMNon-Repetitive Surge Current - I (A) p At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec) 02468 1 0 1 2 1 4 1 6 1 8 2 0 2 2 DC Average Power Loss - (Watts) F(AV) RMS Limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Average Forward Current - I (A) (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR

15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 www.irf.com Outline Table Conform to JEDEC outline TO-220AC Dimensions in millimeters and (inches) Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches)

15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 www.irf.com LOT CODE ASSEMBLY RECTIFIER INTERNATIONALEXAMPLE: IN THE ASSEMBLY LINE "C" ASSEMBLED ON WW 19, 2001 LOT CODE 1789 LOGO LINE C PART NUMBER DATE CODE WEEK 19 YEAR 1 = 2001 THIS IS A 15TQ060 Part Marking Information D2Pak Dimensions in millimeters and (inches) Tape & Reel Information TO-220AC 15TQ060S ASSEMBLED ON WW 02, 2000 LOT CODE 8024 THIS IS A 15TQ060S LOGO LOT CODE ASSEMBLY RECTIFIER INTERNATIONAL YEAR 0 = 2000 DATE CODE WEEK 02 LINE C PART NUMBER

15TQ060, 15TQ060S Bulletin PD-20563 rev. B 06/06 www.irf.com Ordering Information Table

15 T Q 060 S -

1 - Current Rating (15 = 15A) T = TO-220 3 - Schottky "Q" Series 4 - Voltage Rating (060 = 60V) 5 - y none = TO-220 y S= D 2Pak 6 - y none = Standard Production y PbF = Lead-Free Tube Standard Pack Quantity : 50 pieces IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.