15SMC VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

1.5SMC Series www.vishay.com Vishay General Semiconductor Revision: 30-Jun-2021 1 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Surface Mount TRANSZORB® Transient Voltage Suppressors LINKS TO ADDITIONAL RESOURCES DEVICES FOR BIDIRECTION APPLICATIONS For bidirectional devices use CA suffix (e.g. 1.5SMC220CA). Electrical characteristics apply in both directions.

FEATURES

  • Low profile package
  • Ideal for automated placement
  • Glass passivated chip junction
  • Available in unidirectional and bidirectional
  • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
  • Excellent clamping capability
  • Very fast response time
  • Low incremental surge resistance
  • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C
  • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lightning on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MECHANICAL DATA Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: for unidirectional types the band denotes cathode end, no marking on bidirectional types Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.31" x 0.31" (8.0 mm x 8.0 mm) copper pads to each terminal PRIMARY CHARACTERISTICS VWM (unidirectional) 5.8 V to 459 V VWM (bidirectional) 5.8 V to 185 V VBR (unidirectional) 6.8 V to 540 V VBR (bidirectional) 6.8 V to 220 V PPPM 1500 W PD 6.5 W IFSM (uni-directional only) 200 A TJ max. 150 °C Polarity Unidirectional, bidirectional Package SMC (DO-214AB) SMC (DO-214AB) Cathode (unidirectional) (bidirectional) Anode 333DDD3 D 3D Models Available Available MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1) P PPM 1500 W Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) I PPM See next table A Power dissipation on infinite heatsink at TA = 50 °C P D 6.5 W Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2) IFSM 200 A Operating junction and storage temperature range T J, TSTG -65 to +150 °C

1.5SMC Series www.vishay.com Vishay General Semiconductor Revision: 30-Jun-2021 2 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per fig. 3 and derate per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE CA62.35 (4) For bidirectional types with VR of 10 V and less, the ID limit is doubled (5) VF = 3.5 V at IF = 100 A (unidirectional only) ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PART NUMBER DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (4) (μA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/°C)UNI BI MIN. MAX.

1.5SMC Series www.vishay.com Vishay General Semiconductor Revision: 30-Jun-2021 3 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Mounted on minimum recommended pad layout Notes (1) _A is available for 1.5SMC6.8(C)A to 1.5SMC220(C)A, AEC-Q101 qualified (2) _B is available for 1.5SMC250A to 1.5SMC540A, AEC-Q101 qualified THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient air (1) RθJA 75 °C/ WTypical thermal resistance, junction to leads R θJL 15 ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) VOLTAGE RANGE (V) PACKAGE CODE BASE QUANTITY DELIVERY MODEUNI - BI - 1.5SMC6.8AHE3_A/H (1) 1.5SMC6.8AHE3_A/I (1) 1.5SMC250AHM3_B/H (2) 0.211 250 to 540 - H 850 7" diamet er plastic tape and reel 1.5SMC250AHM3_B/I (2) 0.211 250 to 540 - I 3500 13" diamet er plastic tape and reel

1.5SMC Series www.vishay.com Vishay General Semiconductor Revision: 30-Jun-2021 4 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 3 - Pulse Waveform Fig. 4 - Typical Junction Capacitance Uni-Directional Fig. 5 - Typical Transient Thermal Impedance Fig. 6 - Maximum Non-Repetitive Forward Surge Current Unidirectional Use Only 0.1 100 Copper Pad Areas 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms P PPM - Peak Pulse Power (kW) td - Pulse Width (s) 0 25 50 75 100 100 125 150 175 200 TJ - Initial Temperature (°C) Peak Pulse Power (P PP ) or Current (I PP Derating in Percentage, % 100 150 tr = 10 µs Peak Value I PPM Half Value - I PPM IPP td 10/1000 µs Waveform as defined by R.E.A. 0 1.0 2.0 3.0 4.0 t - Time (ms) IPPM - Peak Pulse Current, % I RSM TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of I PPM 100 1000 10 000 20 000 101 100 400 Uni-Directional Bi-Directional TJ = 25 °C f = 1.0 MHz V sig = 50 mVp-p Measured at Zero Bias V R, Measured at Stand-Off Voltage V WM C J - Junction Capacitance (pF) VWM - Reverse Stand-Off Voltage (V) 0.1 1.0 100 0.001 0.01 0.1 100 10 1 1000 tp - Pulse Duration (s) Transient Thermal Impedance (°C/W) 1 10 100 100 200 TJ = TJ max. 8.3 ms Single Half Sine-Wave Number of Cycles at 60 Hz Peak Forward Surge Current (A)

1.5SMC Series www.vishay.com Vishay General Semiconductor Revision: 30-Jun-2021 5 Document Number: 88303 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) 0.260 (6.60) 0.280 (7.11) 0.006 (0.152) 0.012 (0.305) 0.030 (0.76) 0.060 (1.52) 0.008 (0.2) 0.305 (7.75) 0.320 (8.13) 0.220 (5.59) 0.246 (6.22) 0.079 (2.06) 0.103 (2.62) 0.114 (2.90) 0.126 (3.20) Cathode Band SMC (DO-214AB) 0.320 REF. Mounting Pad Layout 0 (0) 0.185 (4.69) MAX. 0.126 (3.20) MIN. 0.060 (1.52) MIN.

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED