15KPS UNSEMI

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

Features

Description

Applications

Revision March 1,2022 Axial Lead Transient Voltage Suppressors www.unsemi.com.tw www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.1/4  JEDEC R-6/P-600 Molded Plastic .  Glass passivated chip junction in R-6/P600 package .  15000 W peak pulse power capability with a 10/1000 us waveform, repetitive rate (duty cycle):0.01 % .  Low leakage .  Excellent clamping capability .  Very fast response time .  Plastic package has Underwriters Laboratory Flammability 94V-0 .  Halogen free and RoHS compliant .  Meet with ISO 7637-2,ISO 16750,etc .  High reliability application and automotive grade AEC Q101 qualifhed. Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application Uni-directional Bi-directional Peak power dissipation with a 10/1000us waveform Power Dissipation on Infinite Heat Sink at TL=75°C Peak pulse current with a 10/1000us waveform Junction and storage temperature range Operating temperature range Peak forward surge current, 8.3ms single half sine-wave PPPM PD IPP TJ, TSTG TOP IFSM 15000 8.0 See Next Table - 55 to +175 - 55 to +150 500 W W A A Functional Diagram Cathode Bi-directional Anode Uni-direction

20 To 36V 15000W

Axial Lead Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/4 Part Number Bi Stand-Off Voltage VRWM (V) Breakdown Voltage VBR Maximum Reverse Leakage IR @VRWM (uA) Maximum Clamping Voltage VC @IPP(V) Test Current IT (mA) Min (V) Max (V)Uni 15KP20CAS 15KP22CAS 15KP24CAS 15KP26CAS 15KP28CAS 15KP30CAS 15KP33CAS 15KP36CAS 15KP20AS 15KP22AS 15KP24AS 15KP26AS 15KP28AS 15KP30AS 15KP33AS 15KP36AS 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 34.3 37.1 40.7 44.0 47.5 50.7 54.7 59.8 Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 3 - I-V Curve Characteristics Figure 4 - I-V Curve Characteristics 349.9 323.5 294.9 272.8 252.7 236.7 219.4 200.7 Electrical Characteristis (@ 25°C Unless Otherwise Specified ) Note:(1)Surge waveform: 10/1000μs 15KPS Series Current IPP¹ (A) Figure 2 - Pulse Derating Curve TA-Ambient temperature(°C) 0 25 50 75 100 125 150 175 200 100 Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % Figure 1 - Pulse Waveform t - Time (ms) 10/1000µsec. Waveform as defined by R.E.A Half Value IPPM (IPPM/2) Peak Value IPPM tr=10µsec TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM 0 1.0 2.0 3.0 4.0 100 150 IPPM - Peak Pulse Current, % IRSM V VC VBR VR IR VFIT IPP Uni-directional VVC VBR VR VCVBRVR IR IR IT IT IPP IPP Bi-directional

Axial Lead Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/4 15KPS Series Load dump ratings are tested on PRIMA ISO7637-P5a ൫ဒઝԊ 5a Soldering Parameters SYSTEM TEST LEVEL Us(V) Td（ms ） Ri（Ω ） NUMBER OF PULSE 12V Ⅳ 87 400 0.5 10 pulse 24V Ⅳ 174 350 2 10 pulse UA U Us Td Tr T 0.9Us 0.1Us pd-Lead–free assembly 150°C 200°C 60 -180 Seconds 3°C/second max 5°C/second max 217°C 60 -150 Seconds 260 +0/-5°C 20 - 40 Seconds 6°C/second max 8 minutes Max 260°C Reflow Condition Pre Heat -Temperature Min (Ts(min)) -Temperature Max (Ts(max)) - Time (min to max) (TS) Average ramp up rate ( Liquidus Temp TL) to peak TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (TS) Peak Temperature (TP) Do not exceed Time 25°C to peak Temperature (TP) Time within 5°C of actual peak Temperature (TP) Ramp-down Rate Ramp up TS(MAX) TS(MIN) Ramp down Time Temperature TP TL Critical Zone TL to TP TL Time 25℃ to peak Ts Preheat Tp

Axial Lead Transient Voltage Suppressors Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.4/4 15KPS Series A B C D Min Max MaxMin Inches Millimeters 1.000 0.340 0.048 0.340 0.360 0.052 0.360 25.40 8.64 1.22 8.64 9.14 1.32 9.14 Part Numbering R6/P600

Ordering Information

Packaging Dimensions Unit: Inches (Millimeters) 0.40±0.020 (10.16±0.508) 2.56 (65.00) 0.25 (6.35) K P C Axxx51 SUPER 5% VBR VOLTAGE TOLERANCE BI-DIRECTIONAL VR VOLTAGE SERIES S 15KPXXXXS R6/P600 250 Box Part Number Component Package Quantity Packaging Option

Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.