6STD25SAR99E10X CONEC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 2
Technical content
( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 6STD25SAR99E10X CONEC ABC dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K2A219 D-SUB FEMALE SEE NOTES Henneboel20.12.10
20.12.10 Fischer
25pos. SOLDER PIN STRAIGHT with threaded spacer clip and hexlocking screw 2:1 (5:1) 6STD25SAR99E10X a Origin SEE NOTE 13 SEE NOTE 7 SEALING COMPOUND 8,7 0,3 10° 21,1 -00,3 38,5 - 0,25 0 + 61,4 - 0 0,3+ O-RING 3,6 -00,25 5,7 -0,05 0,2 8 - 0,23 0,02+ 0,64\ 0,05n (25x) 0,25 7,9 0,3 3 M 3 M 47,04\ 0,13 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. THREADED SPACER CLIPS: COPPER ALLOY; min. 200µ in TIN over 80µin NICKEL PCB-HOLE: n 3,1\` 0,1; PCB THICKNESS 1,6mm 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80 µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. O-RING: SILICON; BLUE 9. SEALING COMPOUND: PUR; BLUE 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT-O UT ON SHEET 2 13. CONNECTOR IS PART MARKED: 6STD25SAR99E10X CON EC ABC Directive 2002/95/EC RoHS compliant 4,69,4 4,75SW
P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K2A219 P.C.B. HOLE DRILLINGS SEE SHEET 1 Henneboel20.12.10 D-SUB FEMALE 25pos. SOLDER PIN STRAIGHT 3:1 SEE SHEET 1 a Origin 3,1\ 0,1n (2x) 2,84 0,1 1 - 0 0,1+n (25x) 47,04\ 0,13 15,19\ 0,1 12,42\ 0,1 9,68\ 0,1 6,91\ 0,1 4,14\ 0,1 1,4\ 0,1 16,56\ 0,1 13,82\ 0,1 11,05\ 0,1 8,28\ 0,1 5,54\ 0,1 2,77\ 0,1 11,4 0,1 3,4 R \ 0,13 42,5\ 0,1 3,1 0,05 n (2x) i 0,26 B i 0,26 A 47,04\ 0,1 B 10°\ 1° A RECOMMENDED PANEL CUT-OUT