15-001453 CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 15-00145o CONEC ABC dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1318 D-SUB COMBINATION FEMALE 90° see notes Henneboel05.06.13

05.06.13 Fischer

with threaded bracket, hexlocking screw and screw 2:1 (5:1) 15-00145 a Original 4-40 UNC SEE NOTE 15 O-RING o (see note 8) 9,4 4,8SW 4,6 12,45 -0,3 0,4 21,1 -00,3 10° 38,5 - 0,25 0 + 47,04\ 0,13 61,4 - 0 0,3+ SEALING COMPOUND 8 - 0,23 0,02+ 6,13 -0,08 0,17 3,6 -00,25 4-40 UNC 11\ 0,3 6,35\ 0,3 3,2\ 0,2 PRESS FOR FIXING ON PCB METAL BRACKET 10,75 -0,3 0,4 13,5 -0,3 0,4 2,85 Ø (5x) AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 265 ° C FOR 8 SEC. AND SOLDER PREHEAT 150° C FOR 180 SEC.) 2. IP RATING: IP 67 3. SEALED TO WITHSTAND PRESSURE UP TO 1,45 PSI FOR 30 MINUTES AFTER HIGH TEMPERATURE EXPOSUR E 4. METALSHELL: ZINC DIE CAST; min. 50µin NICKEL PLATING over COPPER 5. INSULATOR: PBT GF UL 94 V-0; GREEN 6. O-RING: SILICONE PER ASTM D2000 70 SHORE A 7. SEALING COMPOUND: EPOXY RESIN UL 94 V-0; BLACK 8. HIGH POWER CONTACTS 20A: COPPER ALLOY; PLATING MATING SIDE (SEE PART NO.): o PLEASE ADD 1 for 30µin HARD GOLD over min. 50µin N ICKEL o PLEASE ADD 3 for GOLD FLASH over NICKEL PLATING TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL 9. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 10. WASHERS: COPPER ALLOY; 80µin NICKEL 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB SNAPS: COPPER ALLOY; min. 200µin TIN over 8 0µin NICKEL PCB HOLE: n 3.1\` 0.1; PCB THICKNESS 1.6mm 13. P.C.B. HOLE DRILLINGS and RECOMMENDED PANEL CUT-OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3.1 in.LB) / max.67Ncm (6 in.LB) 15. CONNECTOR IS PART MARKED: 15-00145 o CONEC ABC Directive 2002/95/EC RoHS compliant PCB SNAP

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1318 P.C.B. HOLE DRILLINGS SEE SHEET 1 Henneboel05.06.13 D-SUB FEMALE 90° 5W5S 3:1 SEE SHEET 1 a Original RECOMMENDED PANEL CUT-OUT 6,85 8,55 0,1 10,75 3,1\ 0,1Ø (2x) 3,2\ 0,1Ø (5x) 0,86\ 0,1 7,67\ 0,1 14,48\ 0,1 5,94\ 0,1 14,48\ 0,1 P.C.B. EDGE FRONTPANEL P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) 47,04\ 0,13 3,4 R \ 0,13 3,1 0,05 n (2x) 11,4 0,1 42,5\ 0,1 B i 0,26 B i 0,26 A 10°\ 0,1° 47,04\ 0,1 A