6HDD62PAY99R40X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

6HDD62P oY99R40X CONEC ABC NOTES: 1. FOR WAVESOLDERING ( SOLDER BATH TEMPERATURE 24 0°C FOR 5 SEC. / AND SOLDER PREHEAT 120°C FOR 120 SEC. ) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.): o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/ 40-120µin NICKEL/ 120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n3,1±0,1; PCB THICKNESS 1,6mm 8. COLLARS: COPPER ALLOY; NICKEL PLATED 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. FRAME: ZINC DIE CAST; NICKEL PLATED 11. FIXING PLATE: PBT GF UL 94 V-0; BLACK 12. O-RING: SILICON; BLUE 13. RUBBER GASKET: TPE 14. SEALING COMPOUND: PUR; BLUE 15. P.C.B. HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 16. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB) / max.40Ncm (3.5 in.LB) 17. CONNECTOR IS PART MARKED: 6HDD62P oY99R40X CONEC ABC (see note 4) b dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1317 D-SUB HD MALE 90° SEE NOTES Schmidt11.06.13

11.06.13 Fischer

62pos. SOLDER PIN ANGLED threaded insert, metal bracket, snap, fixing plate, hexl. screw 18K1A464 2:1 (5:1) 6HDD62P Y99R40X a Original 4 x b Ä4784 11.06.13 HS b b b 55,3-0 0,25+ POS. 43 POS. 22 POS. 1 4-40 UNC O-RING METAL BRACKET FIXING PLATE 7,15 0,2 9,9 0,2 4-40 UNC 4,69,4 SEE NOTE 17 SEE NOTE 10 8,26-0,03 0,22+ 5,7 -0,31 5,6 0,3 8,14 0,3 10,68 0,3 0,6 0,05 n (62x) 3,3-0,3 0,5+ 6,35\0,3 m ax. 2 SEALING COMPOUND ( 5 : 1 ) RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD 63,5\0,13 PRESS FOR FIXING ON PCB 4,8SW Directive 2002/95/EC RoHS compliant o (see note 4) PCB-SNAP 3,2\`0,2 78 -0 0,3+ 21,1 -00,3 10° 3,6 -00,25

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1317 P.C.B. HOLE DRILLINGS SEE SHEET 1 Schmidt11.06.13 D-SUB HD Male 62pos. Solder pin angled 90° 2:1 SEE SHEET 1 a Original 1,207\0,1 2,413\0,1 49,467\0,05 24,714\0,1 7,036\0,03 4,85 10,75 3,3 0,1 2,54 0,1 2,54 0,1 3,1\0,1n (2x) 0,9-0 0,1+n (62x) 63,5\0,13 FRONTPANEL P.C.B. EDGE P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 3,1 0,05 n (2x) 59,1\0,1 3,4 R \0,13 11,4 0,1 B 63,5\0,1 10°\`1° i 0,26A i 0,26B A RECOMMENDED PANEL CUT-OUT