6STD25PAU99R20X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 6STD25Po U99R20X CONEC ABC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1288 D-SUB MALE 90° SEE NOTES Henneboel08.04.13

09.04.13 Fischer

25pos. SOLDER PIN ANGLED with threaded insert, metal bracket and hex bolt 2:1 (5:1) 6STD25P U99R20X a Original 38,86 - 0,02 0,23+ 10° 7,15 0,2 9,9 0,2 METAL BRACKET O-RING SEE NOTE 9 4-40 UNC 4-40 UNC 4,69,4 SEE NOTE 15 8,26 - 0,03 0,22+ 2 m ax. 5,7 -0,31 SEALING COMPOUND RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 6,35\ 0,3 3,6 -00,25 61,4 - 0 0,3+ 21,1 -00,3 POS. 1 POS. 14 4,8SW 4,55 - 0,3 0,5+ NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, BLACK 4. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO. ): PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) PLEASE ADD B for 20µin HARD GOLD over mi n. 50µin NICKEL PLEASE ADD C for 30µin HARD GOLD over mi n. 50µin NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/ 40-120µin NICKEL/120-200µin TI N 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. COLLARS: COPPER ALLOY; NICKEL PLATED 8. HEXLOCKING SCREWS: STAINLESS STEEL 9. FRAME: ZINC DIE CAST; NICKEL PLATED 10. O-RING: SILICON; BLUE 11. RUBBER GASKET: TPE 12. SEALING COMPOUND: PUR; BLUE 13. P.C.B. HOLE DRILLINGS AND RECOMMENDED PANEL CUT -OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 35N cm (3 .1 in.LB) / max. 40N cm (3.5 in.LB) 15. CONNECTOR IS PART MARKED: 6STD25P U99R20X C ONEC ABC (see note 4) o o o o 47,04\ 0,13 Directive 2002/95/EC RoHS compliant o (see note 4) 0,3 9,84 0,3 3,18Ø (2x) 0,6 0,05 Ø (25x)

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1288 P.C.B. HOLE DRILLINGS see sheet 1 Henneboel08.04.13 D-SUB MALE 90° 25pos. SOLDER PIN ANGLED 3:1 SEE SHEET 1 a Original 3,1\ 0,1n (2x) 1 - 0 0,1+n (25x) 2,77\ 0,1 5,54\ 0,1 8,28\ 0,1 11,05\ 0,1 13,82\ 0,1 16,56\ 0,1 4,85 4,7 0,110,75 1,4 \ 0,1 4,14\ 0,1 6,91\ 0,1 9,68\ 0,1 12,42\ 0,1 15,19\ 0,1 47,04\ 0,13 2,84 0,1 P.C.B. EDGE FRONTPANEL P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 3,1 0,05 n (2x) 42,5\ 0,1 10°\ 1° 47,04\ 0,1 11,4 0,1 3,4 R \ 0,13 A B i 0,26 A i 0,26 B RECOMMENDED PANEL CUT-OUT