6008W8PXX59S20X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 6008W8PXX59S20X CONEC ABC dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1249 D-SUB COMBINATION MALE 90° SEE NOTES Henneboel12.12.12

12.12.12 Fischer

thread insert,metal bracket,hexlocking screw 2:1 (5:1) 6008W8PXX59S20X a Original SEE NOTE 15 21,1 -00,3 78 -0 0,3+ 10° 4-40 UNC 4-40 UNC O-RING SEE NOTE 8 3,6 -00,25 5,7 -0,31 SEALING COMPOUND RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR POS. A1 55,3-0 0,25+ 9,4 4,6 4,8SW METAL BRACKET 9,9 0,2 8,26-0,03 0,22+ m ax. 2 6,35\ 0,3 10,5\ 0,3 NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATOR: PBT GF UL 94 V-0, GREEN 4. HIGH POWER CONTACTS 15A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH over NICKEL PLATING TERMINATION SIDE: 160-240µin TIN over 80µin NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µinNICKEL/120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY;min. 200µin TIN over 80µin NICKEL 7. COLLARS: COPPER ALLOY; NICKEL PLATED 8. FRAME: ZINC DIE CAST; NICKEL PLATED 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. O-RING: SILICON; BLUE 11. RUBBER GASKET: TPE; BLACK 12. SEALING COMPOUND: PUR; BLUE 13. P.C.B. HOLE DRILLINGS AND PANEL CUT-OUT ON SHEE T 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 15. CONNECTOR IS PART MARKED: 6008W8PXX59S20X CON EC ABC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 5,93 0,3 5,65 0,2 63,5\` 0,13 3,18 Ø (2x) Directive 2002/95/EC RoHS compliant 1,9 0,1 Ø (8x)

P.C.B. EDGE FRONTPANEL P.C.B HOLE DRILLINGS ( P.C.B. TOP SIDE ) RECOMMENDED PANEL CUT-OUT dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1249 P.C.B. HOLE DRILLINGS SEE SHEET 1 Henneboel12.12.12 D-SUB COMBINATION MALE 90° 8W8P 3:1 SEE SHEET 1 a Original 3,65 0,1 3,63 9,53 2,54\ 0,1 8,89\ 0,1 15,24\ 0,1 22,86\ 0,1 3,81\ 0,1 10,16\ 0,1 16,51\ 0,1 22,86\ 0,1 63,5\ 0,13 11,4 0,1 3,4 R 0,13 59,1\ 0,1 3,1 0,05 n (2x) i 0,26B i 0,26A 10°\ 1° 63,5\ 0,1 B A