6HDD44SAM99B30X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 6HDD44So M99B30X CONEC ABC dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1204 D-SUB HD FEMALE SEE NOTES Henneboel24.10.12

30.10.12 Fischer

44pos. SOLDER CUP with threaded insert and hexlocking screw 2:1 (5:1) 6HDD44S M99B30X a Original NOTES: 1. RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, BLACK 4. SIGNAL CONTACTS: COPPER ALLOY; PLATING (SEE PA RT NO.) PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) SOLDER CUP ACCEPTS CABLE AWG 22 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TI N over 80µin NICKEL 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80 µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. HEXLOCKING SCREW: STAINLESS STEEL 9. O-RING: SILICON; BLUE 10. SEALING COMPOUND: PUR; BLUE 11. RECOMMENDED PANEL CUT-OUT SEE SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB) / max.40Ncm (3.5 in.LB) 13. CONNECTOR IS PART MARKED: 6HDD44S M99B30X C ONEC ABC (see note 4) o o o o 4-40 UNC 4-40 UNC O-RING SEE NOTE 13 38,5 - 0,25 0 + 8 - 0,23 0,02+ 5,73 -0,08 0,17 8,8 0,3 SEALING COMPOUND AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 1,04Ø (44x) 6,3 0,3 3,6 -00,25 47,04\` 0,13 61,4 - 0 0,3+ 21,1 -00,3 10° 4,8SW 4,6 9,4 SEE NOTE 7 Directive 2002/95/EC RoHS compliant o (see note 4)

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1204 PANEL CUT-OUT see sheet 1 Henneboel24.10.12 D-SUB MALE HD 44pos. SOLDER CUP with insert and hexlocking screw 3:1 SEE SHEET 1 a Original Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350° C, 50 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up. 42,5\ 0,1 47,04\ 0,1 11,4 0,1 3,1 0,05 Ø (2x) 3,4 R \` 0,13 10° i 0,26 A i 0,26 B B A RECOMMENDED PANEL CUT-OUT