6STD15PAU99R10X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

( 5 : 1 ) A A B B C C D D dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1163 D-SUB MALE 90° see notes Schmidt21.09.12

21.09.12 Fischer

15pos. SOLDER PIN ANGLED with threaded insert, metal bracket, hex bolt 2:1 (5:1) 6STD15P U99R10X a Original 6STD15P oU99R10X CONEC ABC 10° 21,1 -00,3 47,7-0 0,3+ 25,17-0,05 0,2+ 33,32-0,12 0,13+ POS. 1 POS. 9 3 M O-RING 3,18n (2x) METAL BRACKET 3 M 4,6 9,4see note 14 see note 7 4,75SW RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATER 5,7 -0,18 0,12 SEALING COMPOUND 3,6 -00,25 m ax. 2 0,3 9,84 0,3 6,35\`0,34,55-0,3 0,5+ 0,6 n 0,05 (15x) 8,26-0,03 0,22+ NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240° C FOR 5 SEC. AND SOLDER PREHEAT 120°C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY PLATING (SEE PART NO): o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/40-120µin NICKEL/120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. FRAME: ZINC DIE CAST, NICKEL PLATED 8. RUBBER GASKET: TPE 9. O-RING: SILICON; BLUE 10. SEALING COMPOUND: PUR; BLUE 11. HEXLOCKING SCREWS: STAINLESS STEEL 12. PCB HOLE DRILLINGS AND PANEL CUT-OUT ON SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 14. CONNECTOR IS PART MARKED: 6STD15P oU99R10X CONEC ABC (see note 4) Directive 2002/95/EC RoHS compliant AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 7,15 0,2 9,9 0,2 o (see note 4)

P.C.B. EDGE FRONTPANEL dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1163 P.C.B. HOLE DRILLINGS see sheet 1 Schmidt21.09.12 D-SUB Male 15pos. Solder pin angled 90° 3:1 see sheet 1 a Original 13,1\0,1n (2x) 33,32-0,12 0,13+ 3,4R \0,13 11,4 0,1 28,8\0,1 3,1 0,05 n (2x) i 0,26B i 0,26A 10°\1° 33,32\0,1 B A RECOMMENDED PANEL CUT-OUT P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) 4,85 10,75 1,37\0,1 4,11\0,1 6,86\0,1 9,6\0,1 2,74\0,1 5,49\0,1 8,23\0,1 2,84 0,1 1 -0 0,1+n (15x) 4,7 0,1