6STD37SBM99B40X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

( 5 : 1 ) A A B B C C D D E E F F A A B B C C D D 6STD37S oM99B40X CONEC ABC dim. in mm R date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1162 D-SUB FEMALE SEE NOTES Henneboel19.09.2012

20.09.2012 Fischer

37pos. SOLDER CUP with threaded lock and hexlocking screw 2:1 (5:1) 6STD37S M99B40X a Original 2 x b Ä6037 14.03.16 M.H. 54,94-0,23 0,02+ 78 -0 0,3+ 21,1 -00,3 10° SEE NOTE 13 8 -0,23 0,02+ 5,73 -0,08 0,17 3,6 -00,25 7,1 0,3 SEALING COMPOUND SEE NOTE 8 O-RING 4,75SW 3 M 4,69,4 3 M AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 6,1 1,16n (37x) NOTES: 1. RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 2. METALSHELLS: COPPER ALLOY; min. 320µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.): o PLEASE ADD A for GOLD FLASH over NICKEL ( PREFERRED TYPE) o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL SOLDER CUP ACCEPTS AWG 20 5. THREADED LOCKS: COPPER ALLOY; min 200µin TIN over 80µin NICKEL 6. COLLARS: COPPER ALLOY; min 200µin TIN over 80µin NICKEL 7. HEXLOCKING SCREWS: STAINLESS STEEL 8. FRAME: ZINC DIE CAST; NICKEL PLATED 9. O-RING: SILICON; BLUE 10. SEALING COMPOUND: PUR; BLUE 11. RECOMMENDED PANEL CUT-OUT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB)/ max.40Ncm (3.5 in.LB) 13. CONNECTOR IS PART MARKED: 6STD37S oM99B40X CONEC ABC RoHS compliant o (see note 4) b b 63,5\`0,13 3 M

A A B B C C D D E E F F A A B B C C D D RECOMMENDED PANEL CUT-OUT dim. in mm R date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1162 RECOMMENDED PANEL CUT-OUT SEE SHEET 1 Henneboel19.09.2012 D-SUB FEMALE 37pos. SOLDER CUP with threaded lock and hexlocking screw 3:1 SEE SHEET 1 a Original 2,1 R \0,13 0,1 59,4\0,1 3,1 -00,1 n (2x) i 0,20B i 0,20A 63,5\`0,1 B A Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350°C, 50 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up.