4STD37PAM99A10X CONEC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
- PDF pages: 1
Technical content
( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1135 D-SUB MALE SEE NOTES Henneboel22.08.12
22.08.12 Fischer
37pos. SOLDER CUP for installation into water resistant hood 18K1IB3A/18K1A232 2:1 (5:1) 4STD37P M99A10X a Original 6 x b Ä4434 22.08.2012 K.H. 4STD37Po M99A10X CONEC ABC NOTES: 1. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 2. INSULATORS: PBT GF UL 94 V-0; BLACK 3. SIGNAL CONTACTS: COPPER ALLOY; PLATING (SEE PART NO.) o PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL o PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRE D TYPE) SOLDER CUP ACCEPTS CABLE AWG 20 4. SEALING COMPOUND: PUR; BLUE 5. RUBBER-GASKET: TPE; BLACK 6. CONNECTOR IS PART MARKED: 4STD37P o M99A10X CONEC ABC (see note 3) Directive 2002/95/EC RoHS compliant Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350° C, 50 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up. 55,3 - 0 0,25+ 63,5\ 0,13 69,5 - 0,56 0,2+ 12,6 -0,43 0,33 10° 3,1\ 0,1Ø 1,4 +0,4 SEE NOTE 6 Pos. 1 Pos. 20 8,26 - 0,03 0,22+ -0,31 0,9 9,5 0,3 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 1,12 n (37x) SEALING COMPOUND o (see note 3) b b b b b b