6STD37PAM99B30X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1106 D-SUB MALE SEE NOTES Henneboel02.08.12

02.08.12 Fischer

37pos. SOLDER CUP with threaded insert and hexlocking screw 18K1A372 / 18K2A372 2:1 (5:1) 6STD37P M99B30X a Original 5 x b Ä4410 02.08.2012 K.H. 4 x c Ä5634 04.05.2015 Lehm. 6STD37P M99B30X CONEC ABCo o NOTES: 1. RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, BLACK 4. SIGNAL CONTACTS: COPPER ALLOY; PLATING (SEE PA RT NO.) PLEASE ADD C for 30µin HARD GOLD over min. 50µin NICKEL PLEASE ADD B for 20µin HARD GOLD over min. 50µin NICKEL PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) SOLDER CUP ACCEPTS CABLE AWG 20 5. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. RUBBER-GASKET: TPE; BLACK 9. HEXLOCKING SCREW: STAINLESS STEEL 10. O-RING: SILICON; BLUE 11. SEALING COMPOUND: PUR; BLUE 12. RECOMMENDED PANEL CUT-OUT SEE SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB) / max. 40Ncm (3.5 in.LB) 14. CONNECTOR IS PART MARKED: 6STD37P M99B30X C ONEC ABC (see note 4) o o o b b c b c c b c 55,3-0 0,25+ 78 -0 0,3+ 21,1 -00,3 10° SEE NOTE 14 O-RING SEE NOTE 7 RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR 8,26-0,03 0,22+ 5,7 -0,31 3,6 -00,25 7,1 0,3 SEALING COMPOUND POS. 1 POS. 20 4-40 UNC 4-40 UNC 4,6 9,4 4,8SW AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. o (see note 4) 1,12n (37x) b 63,5\`0,13 RoHS compliant

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1106 PANEL CUT-OUT SEE SHEET 1 Henneboel02.08.12 D-SUB MALE 37pos. SOLDER CUP with threaded insert and hexlocking screw 3:1 SEE SHEET 1 a Original 11,4 0,1 3,4 R 0,13 59,1\0,1 3,1 0,05 n (2x) i 0,26B i 0,26A 10°\1° 63,5\`0,1 B A RECOMMENDED PANEL CUT-OUT Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350° C, 50 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up.