6HDD26PAY99R20X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

o dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1074 D-SUB HD MALE 90° SEE NOTES Henneboel11.07.12

11.07.12 Koch

26pos. SOLDER PIN ANGLED threaded insert, metal bracket, fixing plate 18K1A476/18K2A476 2:1 (5:1) 6HDD26P Y99R20X a Original 1 x b Ä4375 11.07.12 K.H. o NOTES: 1. FOR WAVESOLDERING ( SOLDER BATH TEMPERATURE 24 0° C FOR 5 SEC. / AND SOLDER PREHEAT 120° C FOR 120 SEC. ) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. SIGNAL CONTACTS: COPPER ALLOY; PLATING (SEE PA RT NO.): PLEASE ADD C for 30µin HARD GOLD over m in. 50µin NICKEL PLEASE ADD B for 20µin HARD GOLD over m in. 50µin NICKEL PLEASE ADD A for GOLD FLASH over NICKEL (PREFERRED TYPE) 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER/4 0-120µin NICKEL/ 120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. HEXLOCKING SCREWS: STAINLESS STEEL 8. FRAME: ZINC DIE CAST; NICKEL PLATED 9. FIXING PLATE: PBT GF UL 94 V-0; BLACK 10. O-RING: SILICON; BLUE 11. RUBBER GASKET: TPE 12. SEALING COMPOUND: PUR; BLUE 13. P.C.B. HOLE DRILLINGS AND RECOMMENDED PANEL CUT-OUT ON SHEET 2 14. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB) / max.40Ncm (3.5 in.LB) 15. CONNECTOR IS PART MARKED: 6HDD26P Y99R20X C ONEC ABC (see note 4) o o o 25,17 - 0,05 0,2+ 8,26 - 0,03 0,22+ 5,7 -0,31 5,6 0,3 8,14 0,3 10,68 0,3 0,6 0,05 n (26x) 6,35\` 0,3 O-RING AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATERRESISTANT CAP OR WATERTIGHT HOOD. SEE NOTE 15 SEALING COMPOUND RUBBER GASKET PLACED ON TOP SURFACE OF MALE INSULATOR FIXING PLATE 3,3 - 0 0,5+ 2 m ax. POS. 1 POS. 10 POS. 19 SEE NOTE 8 3,6 -00,25 33,3 - 0,1 0,15+ 47,7 - 0 0,3+ 21,1 -00,3 10° 4,8SW 4-40 UNC METAL BRACKET 9,9 0,2 4,69,4 4-40 UNC Directive 2002/95/EC RoHS compliant 7,15 0,23,18 Ø (2x) o (see note 4) b

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1074 P.C.B. HOLE DRILLINGS SEE SHEET 1 Henneboel11.07.12 D-SUB HD Male 26pos. Solder pin angled 90° 3:1 SEE SHEET 1 a Original 10,75 4,85 0,9 - 0 0,1+n (26x)1 2,286\ 0,1 1,143\ 0,1 9,652\ 0,1 2,54 0,1 2,54 0,1 3,3 0,1 19,431\ 0,05 33,3 - 0,1 0,15+ 3,1\ 0,1n (2x) P.C.B. EDGE FRONTPANEL P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE ) 6,998\ 0,03 3,1 0,05 n (2x) 28,8\ 0,1 11,4 0,1 3,4 R \ 0,13 B 33,3\ 0,1 10°\ 1° i 0,26 A i 0,26 B A RECOMMENDED PANEL CUT-OUT