6HDD26SAM99B40X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 2

Technical content

AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1041 D-SUB HD Female SEE NOTES Henneboel10.05.12

10.05.12 Fischer

26pos. SOLDER CUP with threaded lock and hexlocking screw 2:1 (5:1) 6HDD26SAM99B40X a Original 24,74 - 0,2 0,05+ 33,3 - 0,1 0,15+ 47,7 - 0 0,3+ 21,1 -00,3 10° 3 M 3 M

3 M n 4

6,1 SEE NOTE 8 SEE NOTE 13 O-RING 8 - 0,23 0,02+ 3,6 -00,25 6,3 0,3 5,73 -0,25 8,8 0,3 1,04n (26x) SEALING COMPOUND 6HDD26SAM99B40X CONEC ABC Directive 2002/95/EC RoHS compliant 9,44,6 4,75SW NOTES: 1. RECOMMENDED SOLDER INSTRUCTION SEE SHEET 2 2. METALSHELLS: COPPER ALLOY; min. 320µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL SOLDER CUP ACCEPTS CABLE AWG 22 5. THREADED LOCKS: COPPER ALLOY; min 200µin TIN o ver 80µin NICKEL 6. COLLARS: COPPER ALLOY; min 200µin TIN over 80µ in NICKEL 7. HEXLOCKING SCREWS: STAINLESS STEEL 8. FRAME: ZINC DIE CAST; NICKEL PLATED 9. O-RING: SILICON; BLUE 10. SEALING COMPOUND: PUR; BLUE 11. RECOMMENDED PANEL CUT-OUT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB)/ max.40Ncm (3.5 in.LB) 13. CONNECTOR IS PART MARKED: 6HDD26SAM99B40X CON EC ABC

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1041 PANEL CUT-OUT see sheet 1 Henneboel10.05.12 D-SUB HD FEMALE 26pos. SOLDER CUP with threaded lock 5:1 SEE SHEET 1 a Original RECOMMENDED PANEL CUT-OUT 29,2\ 0,1 33,3\ 0,1 3,1 -00,1 n (2x) 0,1 B A i 0,20 A i 0,20 B2,1 R \` 0,13 Solder Instruction 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350° C, 50 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 3 seconds longer. Do not heat contact more than 4 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up.