402W2CPXX61A10X CONEC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 402W2CPXX61A10X CONEC ABC dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1033 D-SUB COMBINATION MALE SEE NOTES Henneboel20.04.11
20.04.11 Fischer
for installation into water resistant hood 2:1 (5:1) 402W2CPXX61A10X a Original SEE NOTE 6 0,9 16,63 -0,38 0,12 16,84 - 0,05 0,2+ 25 - 0,13 0,12+ 3,1\` 0,1n 1,4 0,2 -0,18 0,12 30,88 - 0,45 0,31+ 12,6 -0,43 0,33 10° SEALING COMPOUND 1,8 n (2x) NOTES: 1. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 2. INSULATOR: PBT GF UL 94 V-0; GREEN 3. HIGH POWER CONTACTS 10A: COPPER ALLOY PLATING MATING AREA: GOLD FLASH over NICKEL PLATING TERMINATION SIDE: GOLD FLASH over NIC KEL SOLDER CUP ACCEPTS CABLE AWG 16-20 4. FEMALE CONTACT ON POS. A1; MALE CONTACT ON POS . A2 5. SEALING COMPOUND: PUR; BLUE 6. CONNECTOR IS PART MARKED: 402W2CPXX61A10X CO NEC ABC 8,26 - 0,03 0,22+ Solder Instruction: 1. Cable should be prepared for soldering. The cable/wires must be pretinned. 2. Insert cable/wire into solder cup. 3. Operate the soldering iron at 350° C, 100 Watt max. and use a pencil tip. 4. Put tip to wire in solder cup. 5. After 1 second bring in solder. 6. Heat for 5 seconds longer. Do not heat contact more than 6 seconds in total. 7. Remove soldering iron. 8. Wait until solder gets rigid again. 9. Do not solder adjacent contacts consecutively, alternate position within the connector to minimize heat build up. Directive 2002/95/EC RoHS compliant