6STD09SAZ99S20X CONEC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1001 D-SUB FEMALE 90° SEE NOTES Henneboel07.02.12

08.02.12 Fischer

09pos. SOLDER PIN ANGLED with threaded insert, metal bracket and snap 2:1 (5:1) 6STD09SAZ99S20X a Original 16,41 - 0,2 0,05+ 10° O-RING 5,65 0,2 9,9 0,2 METAL BRACKET PRESS FOR FIXING ON PCB SEE NOTE 14 8 - 0,23 0,02+ 5,7 -0,31 m ax. 2 3,2\ 0,2 3,2 - 0,2 0,6+ 6,35\ 0,3 ( 5 : 1 ) SEALING COMPOUND PCB SNAP 11,8 0,3 14,64 0,3 0,6 0,05 n (9x) SEE NOTE 8 4,8SW 3,6 -00,25 4-40 UNC 4-40 UNC 4,69,4 24,99 - 0,13 0,12+ 39,4 - 0 0,3+ 21,1 -00,3 NOTES: 1. FOR WAVESOLDERING ( SOLDER BATH TEMPERATURE 240° C FOR 5 SEC./ AND SOLDER PREHEAT 120° C FOR 120 SEC. ) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN over 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0, BLACK 4. SIGNAL CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. METAL BRACKETS: ZINC DIE CAST; 300µin COPPER /40-120µin NICKEL/120-200µin TIN 6. THREADED INSERTS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL 7. PCB-SNAPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n 3,1\` 0,1; PCB THICKNESS 1,6mm 8. FRAME: ZINC DIE CAST; NICKEL PLATED 9. HEXLOCKING SCREWS: STAINLESS STEEL 10. O-RING: SILICON; BLUE 11. SEALING COMPOUND: PUR; BLUE 12. P.C.B. HOLE DRILLINGS ON SHEET 2 13. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3,1 in.LB) / 40Ncm (3,5 in.LB) 14. CONNECTOR IS PART MARKED: 6STD09SAZ99S20X CONEC ABC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. Directive 2002/95/EC RoHS compliant

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 15K1A1001 P.C.B. HOLE DRILLINGS SEE SHEET 1 Henneboel07.02.12 D-SUB FEMALE 90° 09pos. 3:1 SEE SHEET 1 a Original 2,74\ 0,1 5,49\ 0,1 1,37\ 0,1 4,11\ 0,1 24,99 - 0,12 0,13+ 3,1\ 0,1n (2x) 1 - 0 0,1+n (9x) 2,84 0,1 9,5 0,1 3,359,25 FRONTPANEL P.C.B. EDGE P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 20,5 \ 0,1 24,99\ 0,1 11,4 0,1 3,1 0,05 n (2x) 3,4 R \ 0,13 10°\` 1° B A i 0,26 A i 0,26 B RECOMMENDED PANEL CUT-OUT