15GN01M

15GN01M SANYO

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 4

Technical content

Features

• Small ON-resistance [Ron=2Ω (IB =3mA)].
• Small output capacitance [Cob=1.1pF (VCB =10V)]. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage V CBO 15 V Collector-to-Emitter Voltage V CEO 8V Emitter-to-Base Voltage V EBO 3V Collector Current I C 50 mA Collector Dissipation P C Mounted on a ceramic board(250mm25 0.8mm) 400 mW Junction Temperature Tj 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C RatingsParameter Symbol Conditions min typ max Unit Collector Cutoff Current I CBO VCB =10V, IE=0 0.5 µA Emitter Cutoff Current I EBO VEB =2V, IC =0 0.5 µA DC Current Gain h FE VCE =5V, IC =10mA 200 400 Gain-Bandwidth Product f T VCE =5V, IC =10mA 1.0 1.5 GHz Output Capacitance Cob V CB =10V, f=1MHz 1.1 1.5 pF Collector-to-Emitter Saturation Voltage VCE (sat) I C =20mA, IB=2mA 0.06 0.12 V Output ON resistance Ron I B=3mA, f=10kHz 2.0 Ω Marking : ZA 1 : Base 2 : Emitter 3 : Collector SANYO : MCP 0.3 0.650.65 2.0 0.425 1.250 2.1 0.425 0.15 0 to 0.1 0.2 0.3 0.6 0.9 VHF to UHF Band High-frequency Switching, High- frequency General-Purpose Amplifier Applications SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 15GN01M Package Dimensions unit : mm 2059B [15GN01M]

71003 TS IM TA-100386

Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. NPN Epitaxial Planar Silicon Transistor

No.7540-2/4 Base-to-Emitter V oltage, VBE -- V Collector Current, IC -- mA IT06248 IC -- VBE Collector-to-Emitter V oltage, VCE -- V Collector Current, IC -- mA IC -- VCE IT06247 Collector-to-Emitter V oltage, VCE -- V Collector Current, IC -- mA IC -- VCE IT06246 IB =0 0.05mA 0.10mA 0.15mA 0.20mA 0.25mA0.30mA V CE =5V 3 1.057 2 3 57 10 23 5 7 0.1 0.01 Collector Current, IC -- mA Collector-to-Emitter Saturation V oltage, VCE (sat) -- V IT06249 VCE (sat) -- IC IC / IB =10 0.1 23 5 7 1.0 23 5 7 10 1.0 Collector-to-Base V oltage, VCB -- V Reverse Transfer Capacitance, Cre -- pF IT06250 Cre -- VCB f=1MHz 100 hFE -- IC 1.023 5 7 23 5 7 10 23 5 7 100 Collector Current, IC -- mA DC Current Gain, hFE IT05405 V CE =5V 1.0 1.0 23 5 7 23 5 7 10 100 fT -- IC Collector Current, IC -- mA Gain-Bandwidth Product, fT -- GHz IT05402 V CE =5V Cob -- VCB Collector-to-Base V oltage, VCB -- V Output Capacitance, Cob -- pF IT05404 IB =0 5µA 10µA 15µA 20µA 25µA 30µA 35µA 40µA45µA 0.1 23 5 5 72 3 71.0 10 1.0 f=1MHz

No.7540-3/4 S Parameters (Common emitter) V CE =5V , IC =5mA, Z O =50Ω V CE =5V , IC =10mA, Z O =50Ω V CE =5V , IC =20mA, Z O =50Ω 0 20 40 60 80 100 120 140 160 100 150 200 250 300 350 400 450 IT06251 Collector Dissipation, PC -- mW Mounted on a ceramic board(250mm 250.8mm) PC -- Ta 0.1 23 5 7 23 5 1.0 Ron -- IB Base Current, IB -- mA Ambient Temperature, Ta -- °C Output ON resistance, Ron -- Ω IT05403 f=10KHz IN OUT 1kΩ 10kΩ IB

No.7540-4/4 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of July, 2003. Specifications and information herein are subject to change without notice. PS