1554571

1554571 PHOENIX

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 9

Technical content

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 1 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 8-pos., M12, front/screw mounting with Pg9 thread, with 0.5 m TPE litz wire, 8 x 0.25 mm², stainless steel version Your advantages Pre-assembled with litz wires for immediate use Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness For high transmission safety: shield connection to the housing with optional EMC nut Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356170345 Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP65/IP67/IP69/IP69K IP69K General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2 A

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 2 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Technical data General Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance > 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Material Flammability rating according to UL 94 V0 Contact material Cu alloy Contact surface material Au Contact carrier material PA66 GF Material, knurls Stainless steel Sealing material FKM Cable Cable type TPE litz wire Conductor cross section 0.25 mm² AWG signal line 24 Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Brown, blue, white, gray, pink, green, yellow, red Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 80 Ω/km Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Flammability rating according to UL 94 V0

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 3 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Technical data Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram Pin assignment M12 plug, 8-pos., view plug side

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 4 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Dimensional drawing M12 flush-type plug, can be positioned

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 5 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Dimensional drawing Housing cutout for Pg9 fastening thread, mounting panel with thread

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 6 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Circuit diagram Contact assignment of the M12 plug and the M12 socket Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 ETIM 5.0 EC002061 ETIM 6.0 EC002061

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 7 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Classifications UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 118976 Nominal voltage UN 30 V Nominal current IN 2 A mm²/AWG/kcmil 24 EAC B.01687 cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616 Nominal voltage UN 30 V Nominal current IN 2 A mm²/AWG/kcmil 24-22

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 8 / 9 Panel feed-through - SACC-E-M12MS-8CON-PG 9/0,5 VA - 1554571 Accessories Accessories Circular connectors (device side) Flat nut - SACC-PG9-NUT-VA - 1404984 Flat nut with Pg9 thread Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Seal Flat gasket - SACC-PG9-SEAL CLM - 1556320 Pg9 flat gasket for the rear mounting of M12 flush-type connectors with Pg9 fastening threads

https://www.phoenixcontact.com/pi/products/1554571 09/11/2020 Page 9 / 9 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com