1551914

1551914 PHOENIX

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 11

Technical content

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Device connector, rear mounting, Universal, 8-position, Flush-type male connector, straight, M12-SPEEDCON, coding: A , on free cable end, Rear mounting, M12 x 1, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1240003 Your advantages Pre-assembled with litz wires for immediate use• Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness Standard pin assignments for signal and power transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut SPEEDCON fast locking system reduces cabling times Commercial Data Item number 1551914 Packing unit 1 pc Minimum order quantity 1 pc Sales Key AB24 Product Key ABQCDG Catalog Page Page 47 (C-2-2019) GTIN 4046356161978 Weight per Piece (including packing) 22.61 g Weight per Piece (excluding packing) 22.5 g Customs tariff number 85444290 Country of origin DE SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 1 (11)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Mounting Mounting type Rear mounting M12 x 1 With flat nut Assembly instructions With flat nut Connection method Individual wires Product properties Product type Circular connectors (device side) Number of positions 8 Sensor type Universal No. of cable outlets 1 Shielded no Coding A Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material NBR Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Conductor material Tin-plated Cu litz wires Electrical properties Rated surge voltage 0.8 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

30 V (AC)Nominal voltage UN

30 V (DC)

SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 2 (11)

Connection method Individual wires Type of contact Crimp contacts Conductor cross section 0.25 mm²

1.5 NmTightening torque

Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Flush-type male connector Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding A Connection 2 Head design free cable end Cable/line Cable length 0.5 m Cable type TPE litz wire Signal type/category Universal Wire diameter incl. insulation 1.15 mm ±0.07 mm Single wire, color brown, blue, white, gray, pink, green, yellow, red Conductor material Tin-plated Cu litz wires Conductor structure signal line 14x 0.15 mm AWG signal line 24 Material wire insulation TPE Thickness, insulation 0.21 mm Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Cable resistance ≤ 80 mΩ/m Cable insulation resistance ≥ 20 MΩ*km -40 °C ... 85 °C (cable, fixed installation)Ambient temperature (operation) -25 °C ... 85 °C (Cable, flexible installation) SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 3 (11)

Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standards/specifications IEC 61076-2-101 SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 4 (11)

Ø12,2 max.4,0 +0,1 +0,1 Housing cutout for M12 fastening thread, mounting panel with feed-through hole (alternative with surface as protection against rotation) SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 5 (11)

Housing cutout for M12 fastening thread, mounting panel with thread SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 6 (11)

Pin assignment M12 plug, 8-pos., view plug side SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 7 (11)

 UL Recognized Approval ID: E118976-20100522 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

30 V 2 A - 24 -

 EAC Approval ID: B.01687  cULus Recognized Approval ID: E221474-20140616 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

30 V 2 A 24 - 22 -

SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 8 (11)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 9 (11)

Environmental Product Compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 10 (11)

https://www.phoenixcontact.com/us/products/1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush- type plugs and I/O devices in the field PROT-M12 FS-M - Sealing cap 1430488 https://www.phoenixcontact.com/us/products/1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-DSI-MS-8CON-M12/0,5 SCO - Device connector, rear mounting 1551914 https://www.phoenixcontact.com/us/products/1551914 Jun 7, 2023, 4:55 AM Page 11 (11)