1551590

1551590 PHOENIX

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 10

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector, rear mounting, Ethernet CAT5 (100 Mbps), Ethernet, 4-position, PUR, water blue RAL 5021, Pin, straight, M12, coding: D, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 5 m, Ethernet, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1239991 Commercial data Item number 1551590 Packing unit 1 pc Minimum order quantity 20 pc Product key ABQDGC GTIN 4046356153713 Weight per piece (including packing) 244 g Weight per piece (excluding packing) 224 g Country of origin DE SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 1 (10)

General The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. General Lock nut is included in the scope of delivery Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
• Only use tools recommended by Phoenix Contact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory Safety note SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 2 (10)

section of the product at phoenixcontact.com/products

• Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly instructions With flat nut Connection method Cable connection Product properties Product type Circular connectors (device side) Sensor type Ethernet Number of positions 4 No. of cable outlets 1 Shielded yes Coding D Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material NBR Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Outer sheath, material PUR Conductor material Bare Cu litz wires Electrical properties Rated surge voltage 2.5 kV AC Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

48 V ACNominal voltage UN

60 V DC

SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 3 (10)

Nominal current IN 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)

2500 VTest voltage

Transmission medium Copper Transmission characteristics (category) CAT5 (IEC 11801:2002) Wave impedance 100 Ω Max. conductor resistance 150 mΩ/m Connection data Conductor connection Connection method Cable connection Contact connection type Pin Conductor cross section 0.14 Connector Connection 1 Head design Pin Head cable outlet straight Head thread type M12 Coding D Connection 2 Head design free cable end Cable/line Cable length 5 m Ethernet flexible CAT5, 2-pair [93E] Dimensional drawing Cable weight 42 kg/km UL AWM Style 20963 (80°C/30 V) Wiring standards/regulations Electrical requirements EN 50288-2-2 Number of positions 4 Shielded yes Cable type Ethernet flexible CAT5, 2-pair [93E] SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 4 (10)

Conductor structure 2x2xAWG26/7, SF/UTP Signal runtime 5.3 ns/m Conductor structure signal line 7x 0.16 mm AWG signal line 26 Conductor cross section 2x 2x 0.14 mm² Wire diameter incl. insulation 0.98 mm External cable diameter 6.4 mm ±0.2 mm Outer sheath, material PUR External sheath, color water blue RAL 5021 Conductor material Bare Cu litz wires Material wire insulation Foamed PE Single wire, color white/orange-orange, white/green-green Thickness, outer sheath 1.2 mm Twisted pairs 2 cores to the pair Overall twist Two pairs with two fillers to the core Optical shield covering 70 % Insulation resistance ≥ 500 MΩ*km Coupling resistance ≤ 100.00 mΩ/m (at 10 MHz) Loop resistance ≤ 290.00 Ω/km Wave impedance 100 Ω ±5 Ω (at 100 MHz) Cable capacity approx. 45 nF/km (at 1 kHz) Nominal voltage, cable ≤ 100 V (Peak value, not for high-power applications) Test voltage Core/Core 700 V (50 Hz, 1 min.) Test voltage Core/Shield 700 V (50 Hz, 1 min.) Current carrying capacity of cable 2 A (according to DIN VDE 0891-1) Minimum bending radius, fixed installation 4 x D Minimum bending radius, flexible installation 8 x D Smallest bending radius, fixed installation 26 mm Smallest bending radius, movable installation 52 mm Tensile strength ≤ 80 N 65.3 dB (with 1 MHz) 56.3 dB (at 4 МHz) 50.3 dB (at 10 MHz) 47.2 dB (at 16 MHz) 45.8 dB (at 20 МHz) 42.9 dB (at 31.25 МHz) 38.4 dB (at 62.5 МHz) Near end crosstalk attenuation (NEXT) 35.3 dB (at 100 MHz) 62.3 dB (with 1 MHz) 53.3 dB (at 4 МHz) 47.3 dB (at 10 MHz) 44.2 dB (at 16 MHz) Power-summated near end crosstalk attenuation (PSNEXT) SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 5 (10)

42.8 dB (at 20 МHz) 39.9 dB (at 31.25 МHz) 35.4 dB (at 62.5 МHz) 32.3 dB (at 100 MHz) 23 dB (at 4 МHz) 24.1 dB (at 8 МHz) 25 dB (at 10 MHz) 25 dB (at 16 MHz) 25 dB (at 20 МHz) 23.6 dB (at 31.25 МHz) 21.5 dB (at 62.5 МHz) Return attenuation (RL) 20.1 dB (at 100 MHz) 3.2 dB (with 1 MHz) 6 dB (at 4 МHz) 9.5 dB (at 10 MHz) 12.1 dB (at 16 MHz) 13.6 dB (at 20 МHz) 17.1 dB (at 31.25 МHz) 24.8 dB (at 62.5 МHz) Shield attenuation 32 dB (at 100 MHz) Halogen-free according to IEC 60754-1 according to IEC 60332-1-2 in acc. to UL VW1 Flame resistance in accordance with UN ECE-R 118.03 Resistance to oil in accordance with EN 60811-2-1 -40 °C ... 80 °C (cable, fixed installation)Ambient temperature (operation) -20 °C ... 80 °C (Cable, flexible installation) Ambient temperature (installation) -20 °C ... 80 °C Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 6 (10)

46,5 M16x1,5SW19 M12x1 Dimensional drawing Circuit diagram

1 WH/OG

2 WH/GN

SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 7 (10)

Pin assignment M12 male connector, 4-pos., D-coded, male side SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 8 (10)

ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 9 (10)

Environmental product compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACCBP-M12MSD-4CON-M16/5,0-931 - Device connector, rear mounting 1551590 https://www.phoenixcontact.com/us/products/1551590 Jan 16, 2024, 3:58 AM Page 10 (10)