1551529 PHOENIX

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 13

Technical content

Please be informed that the data shown in this PDF document is generated from our Online Catalog. Please find the complete data in the user documentation. Our General Terms of Use for Downloads are valid. Device connector, rear mounting, PROFINET CAT5 (IEC 11801:2002), 4-position, Flush-type female connector, straight, M12-SPEEDCON, D, on free cable end, Rear mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire item no.: 1239987 Your advantages Pre-assembled with litz wires for immediate use• Customer-specific assemblies and litz wire lengths available Sealed on the litz wire side for optimum leak-tightness All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission safety: shield connection to the housing with optional EMC nut SPEEDCON fast locking system reduces cabling times Commercial Data Item number 1551529 Packing unit 1 pc Minimum order quantity 1 pc Note Made to Order (non-returnable) Sales Key A11 Product Key ABQCDH Catalog Page Page 46 (C-2-2019) GTIN 4046356153614 Weight per Piece (including packing) 22.5 g Weight per Piece (excluding packing) 22.3 g Customs tariff number 85444290 Country of origin DE Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 1 (13)

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Notes on operation This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact Safety note Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 2 (13)
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting Pg9 With flat nut Assembly instructions With flat nut Product properties Product type Circular connectors (device side) Number of positions 4 No. of cable outlets 1 Shielded no Coding D - data Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Sealing material FKM Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ

250 V (AC)Nominal voltage UN

250 V (DC)

Transmission medium Copper Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 3 (13)

Connection method Individual wires Type of contact Crimp contacts Conductor cross section 0.34 mm²

2 NmTightening torque

Head design Flush-type female connector Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding D Connection 2 Head design free cable end Cable / line Cable length 0.5 m Cable type TPE litz wire Signal type/category PROFINET CAT5 (IEC 11801:2002) Wire diameter incl. insulation 1.2 mm ±0.07 mm Single wire, color yellow, orange, white, blue Conductor material Tin-plated Cu litz wires Conductor structure signal line 7x 0.25 mm AWG signal line 22 Material wire insulation TPE Thickness, insulation 0.21 mm Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Cable resistance ≤ 57.6 mΩ/m Cable insulation resistance ≥ 20 MΩ*km Ambient conditions IP67 (When plugged in)Degree of protection IP65 (When plugged in) Degree of protection IP65/IP67 -25 °C ... 85 °C (Plug / socket)Ambient temperature (operation) -40 °C ... 85 °C (without mechanical actuation) Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 4 (13)

Standards/specifications according to IEC 61076-2-101 Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 5 (13)

45° Ø16 Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 6 (13)

0 10 20 30 40 50 60 70 80 90 100 110 120 130 I [A] [°C] = 4x0,34mm 2 1 I = current strength, T = ambient temperature Schematic diagram 2 3 10 11 Pin assignment M12, 12-pos., female side view Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 7 (13)

13,5 1x45° Ø15,3 max.4,5 +0,1 +0,1 Housing cutout for Pg9 fastening thread, mounting panel with feed-through hole (alternatively with surface as protection against rotation) Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 8 (13)

 UL Recognized Approval ID: FILE E 118976 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

250 V 4 A - 22 -

 EAC Approval ID: B.01687  cULus Recognized Approval ID: E221474-20140616 Nominal Voltage UN Nominal Current IN Cross Section AWG Cross Section mm2

250 V 4 A 22 - 20 -

Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 9 (13)

ECLASS-9.0 27440102 ECLASS-10.0.1 27440102 ECLASS-11.0 27440102 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 10 (13)

Environmental Product Compliance REACh SVHC Lead 7439-92-1 Environmentally Friendly Use Period = 50 yearsChina RoHS For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 11 (13)

Screw plug - PROT-M12 - 1680539 https://www.phoenixcontact.com/us/products/1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors Screw plug Screw plug - PROT-M12 SH - 1503302 https://www.phoenixcontact.com/us/products/1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 12 (13)

Screw plug - PROT-M12 FB - 1555538 https://www.phoenixcontact.com/us/products/1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry Flat gasket Flat gasket - SACC-PG9-SEAL CLM - 1556320 https://www.phoenixcontact.com/us/products/1556320 Pg9 flat gasket, for M12 flush-type connectors with Pg9 fastening thread Phoenix Contact 2023 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Device connector, rear mounting - SACC-DSI-FSD- 4CON-PG9/0,5 SCO 1551529 https://www.phoenixcontact.com/us/products/1551529 Jan 11, 2023, 2:42 AM Page 13 (13)