15-21-GHC-YR1S1-2T TO-GRACE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

Features

․Package in 8mm tape on 7〞d i a m e t e r r e e l . ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. Descriptions ․The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip PART No. Material Emitted Color Lens Color 15-21/GHC-YR1S1/2T InGaN Brilliant Green Water Clear 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 2 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 3 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol 2 6 0 (for 5 second) Electrostatic Discharge ESD 150 V Power Dissipation Pd 110 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 112 ----- 225 mcd Viewing Angle 2θ1/2 ----- 140 ----- deg Peak Wavelength λp ----- 518 ----- nm Dominant Wavelength Spectrum Radiation Bandwidth △λ ----- 35 ----- nm Forward Voltage VF ----- 3.5 3.7 V IF=20mA Reverse Current IR ----- ----- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 4 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Bin Range Of Dom. Wavelength Group Bin Min Max Unit Condition X 520 525 Y 525 530 Y Z 530 535 nm I F=20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition R1 112 140 R2 140 180 S1 180 225 mcd I F=20mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 5 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Typical Electro-Optical Characteristics A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 6 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 7 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 8 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ 5 s e c . 6 Min. 22 Pcs. 0/1

2 Temperature Cycle

H : +100℃ 15m in ∫ 5 min L : -40℃ 15m in 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5m in ∫ 10 sec L : -10℃ 5m in 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/85% RH 1000 Hrs. 22 PCS. 0/1 A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 9 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 ℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 ±5℃ for 24 hours. 3. Soldering Condition 3 . 1 P b - f r e e s o l d e r t e m p e r a t u r e p r o f i l e 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/GHC-YR1S1/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 2 Page: 10 of 10 Device No: SZDSE-151-G01 Prepared date: 11-Jan-2005 Prepared by: Aihua hong 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com A ll data sheet.com