15-21-G6C-FP1Q1L-2T TO-GRACE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

Features

․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. Descriptions ․The 15-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Material Emitted Color Lens Color 15-21/G6C-FP1Q1L/2T AlGaInP Brilliant Yellow Green Water Clear 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Package Outline Dimensions Note: Tolerances Unless Dimension ±0.1mm , Unit = mm A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Soldering Temperature Tsol Reflow Soldering : 260℃ for 10sec. Hand Soldering : 350℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 45.0 ----- 90.0 mcd Viewing Angle 2θ1/2 ----- 140 ----- deg Peak Wavelength λp ----- 575 ----- nm Dominant Wavelength λd 570.0 ----- 574.5 nm Spectrum Radiation Bandwidth △λ ----- 20 ----- nm Forward Voltage VF 1.70 ----- 2.30 V IF =20mA Reverse Current IR ----- ----- 10 μA VR =5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.05V A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Bin Range Of Dom. Wavelength Group Bin Min Max Unit Condition CC2 570.0 571.5 CC3 571.5 573.0 F CC4 573.0 574.5 nm I F=20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition P1 45.0 57.0 P2 57.0 72.0 Q1 72.0 90.0 mcd I F=20mA Bin Range Of Forward Voltage Group Bin Min Max Unit Condition 19 1.70 1.80 20 1.80 1.90 21 1.90 2.00 22 2.00 2.10 23 2.10 2.20 L 24 2.20 2.30 V I F=20mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.05V A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Typical Electro-Optical Characteristics Curves A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension ±0.1mm , Unit = mm A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension ±0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD： 10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min 5 sec. 6 Min. 22 Pcs. 0/1

2 Temperature Cycle

H : +100℃ 15m in ∫ 5 min L : -40℃ 15m in 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5m in ∫ 10 sec L : -10℃ 5m in 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/85% RH 1000 Hrs. 22 PCS. 0/1 A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less(Floor life). However,it’s recommended that The LEDs should be used within 168 hours (7 days) after opening the package.If unused LED remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. A ll data sheet.com

EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FP1Q1L/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 10 Device No:SZDSE-151-G06 Prepared date:23-Mar-2005 Prepared by: Zhang huali 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 0512-63409123-1603 Office: No 355,Zhong Shan North Rd ,WuJiang, Fax: 0512-63409123-1510 Economy Development Zone(YunXi Area), http://www.everlight.com SongLing Town,WuJiang City,JiangSu PRC, China. A ll data sheet.com