15-21-G6C-FM1N2B-2T EVERLIGHT

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

Features

․Package in 8mm tape on 7«diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain with in RoHS complaint version Descriptions ․ The 15-21 SMD LED Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․ Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide ChipPart No. Material Emitted Color Resin Color 15-21/G6C-FM1N2B/2T AlGaInP Brilliant Yellow Green Water Clear

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin Package Outline Dimensions 1.4 Note: Tolerances Unless Dimension Ô0.1mm , Unit = mm

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin Absolute Maximum Ratings (Ta=25Ċ) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge ESD 2000 V Operating Temperature Topr -40 ~ +85 Ċ Storage Temperature Tstg -40 ~ +90 Ċ Soldering Temperature Tsol Reflow Soldering : 260Ċ for 10sec. Hand Soldering : 350Ċ for 3 sec. Electro-Optical Characteristics (Ta=25Ċ) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 18.0 ----- 45.0 mcd Viewing Angle 2ǀ1/2 ----- 140 ----- deg Peak Wavelength ǃp ----- 575 ----- nm Dominant Wavelength ǃd 570.0 ----- 574.5 nm Spectrum Radiation Bandwidth ¶ǃ ----- 20 ----- nm Forward Voltage VF 1.75 ----- 2.35 V IF =20mA Reverse Current IR ----- ----- 10 DŽA VR =5V Notes: 1.Tolerance of Luminous Intensity Ô11% 2.Tolerance of Dominant Wavelength Ô1nm 3.Tolerance of Forward Voltage Ô0.1V

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin Bin Range Of Dom. Wavelength Group Bin Min Max Unit Condition CC2 570.0 571.5 CC3 571.5 573.0F CC4 573.0 574.5 nm IF=20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition M1 18.0 22.5 M2 22.5 28.5 N1 28.5 36.0 N2 36.0 45.0 mcd IF=20mA Bin Range Of Forward Voltage Group Bin Min Max Unit Condition 0 1.75 1.95 1 1.95 2.15B 2 2.15 2.35 V IF=20mA Notes: 1.Tolerance of Luminous Intensity Ô11% 2.Tolerance of Dominant Wavelength Ô1nm 3.Tolerance of Forward Voltage Ô0.1V

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin Typical Electro-Optical Characteristics Curves

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin YYYYYY YYYYYY YYYYYYYYYYYY YYYY YYYYYYYY RoHS Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension Ô0.1mm , Unit = mm

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension Ô0.1mm , Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence levelj90% LTPDj10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260ĊÔ5Ċ Min 5 sec. 6 Min. 22 Pcs. 0/1

2 Temperature Cycle

H : +100Ċ 15min í 5 min L : -40Ċ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100Ċ 5min í 10 sec L : -10Ċ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100Ċ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40Ċ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85Ċ/85% RH 1000 Hrs. 22 PCS. 0/1

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30Ċ or less and 90%RH or less. 2.3After opening the package, the LEDs should be kept at 30Ċ or less and 70%RH or less(Floor life). However,it’Trecommended that The LEDs should be used within 168 hours (7 days) after opening the package.If unused LED remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60Ô5Ċ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.

LifecyclePhase: Revision : 1 Expired Period: Forever Release Date:2008-09-20 00:16:10.0 EVERLIGHT ELECTRONICS CO.,LTD. 15-21/G6C-FM1N2B/2T Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 10 Device No:SZDSE-151-G33 Prepared date:30-Aug-2007 Prepared by: Libin 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 Ċ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 0512-63409123-1603 Office: No 355,Zhong Shan North Rd ,WuJiang, Fax: 0512-63409123-1510 Economy Development Zone(YunXi Area), http://www.everlight.com SongLing Town,WuJiang City,JiangSu PRC, China.