15-21-B6C-YR1S2B2-2T TO-GRACE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

E verlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 1 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen T echnical Data Sheet 5-21/B6C-YR1S2B2/2T F eatures ackage in 8mm tape on 7〞diameter reel. ompatible with automatic placement equipment. ompatible with infrared and vapor phase reflow solder process. ono-color type. ․Pb-free. ․The product itself will remain within RoHS complaint version. D escriptions he 15-21 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. D evice Selection Guide P ART No. Chip Emitted Color Resin Color M aterial 5-21/B6C-YR1S2B2/2T InGaN Blue Water Clear 香港至恩科技有限公司 www.to-grace.com 公司授权代理销售LITE-ON:光耦，贴片LED灯等 进口原装，现货供应，价格优势，技术支持 电话：0755-83464948 传真：0755-83464076 A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 2 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Package Outline Dimensions 1.4 0.8 1.6 0.8 1.5 1.51.2 1.2 Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 3 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Absolute Maximum Ratings (Ta=25℃℃ ℃℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 95 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. H and Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃℃ ℃℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 112 ----- 285 mcd IF=20mA Viewing Angle 2θ1/2 ----- 130 ----- deg Peak Wavelength λp ----- 468 ----- nm Dominant Wavelength λd 4 70.0 ----- 475.0 nm Spectrum Radiation Bandwidth △λ - ---- 25 ----- nm Forward Voltage VF 2.90 ---- 3.60 V Reverse Current I R ----- ----- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±±±±11% 2.Tolerance of Dominant Wavelength ±±±±1nm 3.Tolerance of Forward Voltage ±±±±0.05V A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 4 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Bin Range Of Dom. Wavelength Bin Min Max Unit Condition Y 470.0 475.0 nm I F =20mA Bin Range Of Luminous Intensity Bin Min Max Unit Condition R1 112 140 mcd I F=20mA R2 140 180 S1 180 225 S2 225 285 Bin Range Of Forward Voltage Group Bin Min Max Unit Condition 36 2.90 3.00 V I F =20mA 37 3.00 3.10 38 3.10 3.20 39 3.20 3.30 40 3.30 3.40 41 3.40 3.50 42 3.50 3.60 Notes: 1.Tolerance of Luminous Intensity ±±±±11% 2.Tolerance of Dominant Wavelength ±±±±1nm 3.Tolerance of Forward Voltage ±±±±0.05 V A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 5 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Typical Electro-Optical Characteristics Relative luminous intensity Ambient Temperature T (°C -60 -20 -40 0 20 6040 100 80 100 % )( 1000 Relative luminous intensity( ) % Wavelength λ(nm) Ta=25°C Forward Voltage V (V)F Forward Current I (mA) Ta=25°C Relative luminous intensity ( ) % Forward Current I (mA) Ta=25°C Ambient Temperature T (°Ca ) Forward Current I (mA) 70° 0.20.3 0.7 0.5 0.1 90° 80° 0.4 0.6 10° 0.9 0.8 1.0 40° 60° 50° 30° 20° Ta=25°C A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 6 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm RoHS Pb CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX CAT : XXX HUE : XXX REF : XXX EVERLIGHT MADE IN TAIWAN A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 7 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension is ±0.1mm , Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 8 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% L TPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. 6 Min. 22 Pcs. 0/1

2 Temperature Cycle

H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 9 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. .3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. I f unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. . Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. A ll data sheet.com

Everlight Electronics Co., Ltd. http://www.everlight.com Rev 1 Page: 10 of 10 Device No: DSE-000 Prepared date: 30-Jun.-2011 Prepared by: ZhouChen 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds w ithin once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com A ll data sheet.com