14M YAGEO

Document overview

  • PDF pages: 11

Technical content

Page 1

PDF page 1 diagram

DATA SHEET

POWER SUPPLY

TMOV 14M(E,N) series RoHS compliant & Halogen free

Page 2

PDF page 2 diagram

Metal Oxide Varistor Data Sheet

Features

■ TMOV integrated thermal protection device ■ High peak surge current rating up to 6KA ■ Designed to facilitate compliance to UL1449 for TVSS products ■ Wide operating voltage (V1mA) range from 82V to 1200V ■ Rated current: 5A ■ Rated Functioning Temperature:136(℃) ■ Fast responding to transient over-voltage and limited current ■ Large absorbing transient energy capability ■ Low clamping ratio and no follow-on current ■ Three-lead version available for indication purposes ■ Meets MSL level 1, per J-STD-020 ■ Operating Temperature:-40℃ ~ +85℃ ■ Storage Temperature:-40℃ ~ +85℃ ■ Safety certification: UL: E327997

Applications

■ AC power line or AC/DC supplies ■ Transistor, diode, IC, thyristor or triac semiconductor protection ■ Surge protection in consumer electronics ■ Surge protection in industrial electronics ■ Surge protection in electronic home appliances, gas and petroleum appliances ■ Relay and electromagnetic valve surge absorption ■ AC panel protection Modules

Part number code

PDF page 2 diagram

Varistor Voltage 820: 82V 101: 100V 102: 1000V

Element Diameter 14

Type M/E/N: different internal structure

Page 3

PDF page 3 diagram

Lead configurations and application examples

N Series

PDF page 3 diagram
PDF page 3 diagram

2 Thermal Fuse Element Authorized by UL

MOV

Front view

e

E

1

F

Bottom view

M Series D Monitor lead 3 H Thermal Fuse Element Authorized by UL 2 L3 Φd 2 1 3 Front view MOV e1 e E F F1 1 Bottom view Line Line Fuse Circuit TMOV Varistor Protected LED To R Neutral Line Line Fuse Circuit TMOV Varistor Protected R AC OPTOCOUPLER To TO STATUS ANNUNCIATOR LIGHT/ALARM Neutral Line Load Switch Relay Line Fuse (loss of protection) R "Load Powered" neon lamp Circuit Protected TMOV Varistor Fault LED (Normally off) To R Neutral
E Series D 3 Thermal H Fuse Element Authorized by UL L3 3 2 Monitor lead Φd 1 2 Front view MOV e1 e E F F1 1 Bottom view

Page 4

PDF page 4 diagram

Dimensions

Symbol BK’S M / E / N Varistor Unit: mm
14M 14E 14N
D (max.) 19.0 19.0 19.0
H (max.) 21.0 21.0 21.0
F (±1.0) 7.5 7.5 7.5
F1 (±1.0) 5.0 5.0 -
e (max.) 820K~121K 2.8 2.8 2.8
151K~391K 3.8 3.8 3.8
431K~621K 5.5 5.5 5.5
681K~911K 7.8 7.8 7.8
102K~122K 10.0 10.0 10.0
e1 820K~121K 1.3±0.8 1.3±0.8 -
151K~391K
431K~621K
681K~911K
102K~122K
E (max.) 820K~121K 8.8 8.8 8.8
151K~391K 9.8 9.8 9.8
431K~621K 11.5 11.5 11.5
681K~911K 13.8 13.8 13.8
102K~122K 16.0 16.0 16.0
L (min.) 20.0 20.0 20.0
L3 (min.) 10.0 10.0 -
Φd (±0.05) 0.8

Page 5

PDF page 5 diagram

Electrical characteristics

Part Number Maximum Allowable Voltage Varistor Voltage Maximum Clamping Voltage Maximum Peak Current (8/20μs) Maximum Energy (Joule) Rated Powe r Typical Capacitanc e (Reference)
V (V AC ) V (V DC ) V (V) 1mA I (A) P V (V) C 1 time 2 times 10/1000μ s 2ms (W) @1KHz (pf)
(A)
820KM(E,N)14 50 65 82(74~90) 50 155 4500 2500 27 22 0.6 2400
101KM(E,N)14 60 85 100(90~110) 50 165 4500 2500 33 28 0.6 2000
121KM(E,N)14 75 100 120(108~132) 50 200 4500 2500 40 32 0.6 1700
151KM(E,N)14 95 125 150(135~165) 50 250 6000 4500 50 35 0.6 1300
181KM(E,N)14 115 150 180(162~198) 50 300 6000 4500 58 40 0.6 1100
201KM(E,N)14 130 170 200(185~225) 50 340 6000 4500 70 50 0.6 1000
221KM(E,N)14 140 180 220(198~242) 50 365 6000 4500 78 55 0.6 900
241KM(E,N)14 150 200 240(216~264) 50 395 6000 4500 85 60 0.6 830
271KM(E,N)14 175 225 270(243~297) 50 455 6000 4500 100 70 0.6 740
301KM(E,N)14 190 250 300(270~330) 50 500 6000 4500 107 75 0.6 670
331KM(E,N)14 210 275 330(297~363) 50 550 6000 4500 115 80 0.6 610
361KM(E,N)14 230 300 360(324~396) 50 595 6000 4500 125 90 0.6 560
391KM(E,N)14 250 320 390(351~429) 50 650 6000 4500 140 100 0.6 510
431KM(E,N)14 275 350 430(387~473) 50 710 6000 4500 155 110 0.6 460
471KM(E,N)14 300 385 470(423~517) 50 775 6000 4500 175 125 0.6 430
511KM(E,N)14 320 415 510(459~561) 50 845 6000 4500 190 136 0.6 390
561KM(E,N)14 350 460 560(504~616) 50 920 6000 4500 200 140 0.6 360
621KM(E,N)14 385 505 620(558~682) 50 1025 6000 4500 210 150 0.6 320
681KM(E,N)14 420 560 680(612~748) 50 1120 6000 4500 220 155 0.6 290
751KM(E,N)14 460 615 750(675~825) 50 1240 6000 4500 225 160 0.6 270
781KM(E,N)14 485 640 780(702~858) 50 1290 6000 4500 240 165 0.6 260
821KM(E,N)14 510 670 820(738~902) 50 1355 6000 4500 245 170 0.6 240
911KM(E,N)14 550 745 910(819~1001) 50 1500 6000 4500 255 180 0.6 220
102KM(E,N)14 625 825 1000(900~1100) 50 1650 6000 4500 280 190 0.6 200
112KM(E,N)14 680 895 1100(990~1210) 50 1815 6000 4500 310 205 0.6 180
122KM(E,N)14 750 990 1200(1080~1320) 50 1980 6000 4500 338 215 0.6 150

Notes: Leakage Current (@83% of V1mA): IR≤35μA (820K~122K).

Page 6

PDF page 6 diagram

Electrical Ratings

Items Test Condition/Description Requirement
Varistor Voltage The voltage between two terminals with the specified measuring current 1mA.DC applied is called Vb. To meet the Specified value
Maximum Allowable Voltage The recommended maximum sine wave voltage (RMS) or the Maximum DC voltage can be applied continuously.
Maximum Clamping Voltage The maximum voltage between two terminals with the specification standard impulse current. Applied waveform: 8/20μs Crest value 100 90 (%) Current 50 20µs 10 8µs 0 Time Impulse Width
Rated Wattage The maximum average power that can be applied within the specified ambient temperature.
Energy The maximum energy within the varistor voltage change of ±10% when one impulse of 10/1000μs or 2ms is applied.
Withstanding Surge Current The maximum current within the varistor voltage change of ±10% with the standard impulse current (8/20μs) applied one time.
Varistor Voltage Temp. Coefficient V 1mA@85℃-V 1mA@25℃ × 1 × 100%(%/℃) V 60 1mA@25℃ ≤0.05%/℃
V 1mA@-40℃-V 1mA@25℃ × 1 × 100%(%/℃) V 65 1mA@25℃

Page 7

PDF page 7 diagram

Mechanical Characteristics

Items Test conditions / Methods Specifications
Tensile Strength of Terminals Gradually applying the force specified and keeping the unit fixed for 10±1 sec. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 1.0 0.8<d≤1.25 2.0 1.25<d 4.0 No visible damage |ΔV /V |≤5% 1mA 1mA
Bending Strength of Terminals Hold specimen and apply the force specified below to each lead. Bend the specimen to 90°, then return to the original position. Repeat the procedure in the opposite direction. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 0.5 0.8<d≤1.25 1.0 1.25<d 2.0 No visible damage |ΔV /V |≤5% 1mA 1mA
Vibration Frequency range: 10~55 Hz Amplitude: 0.75mm or 98m/s2 Direction: 3 mutually perpendicular directions, 2hrs each. No visible damage |ΔV /V |≤5% 1mA 1mA
Solder ability Solder Temp: 245±5℃ Dipping Time: 2±0.5 sec At least 95% of terminal electrode is covered by new solder
Resistance to Soldering Heat Solder Temp: 260±5℃ Dipping Time: ≤5 sec No visible damage |ΔV /V |≤10% 1mA 1mA

Reliability

Items Test conditions / Methods Specifications
High Temperature Storage Ambient Temp: 85±2℃ Duration: 1000hrs |ΔV /V |≤5% 1mA 1mA
Low Temperature Storage Ambient Temp: -40±2℃ Duration: 1000hrs |ΔV /V |≤5% 1mA 1mA
Humidity Ambient Temp: 40±2℃, 90~95% R.H. Duration: 1000hrs |ΔV /V |≤5% 1mA 1mA
Temperature Cycle The conditions shown below shall be repeated 5 cycles Step Temperature (℃) Period (minutes) 1 -40±3 30±3 2 Room temperature 15±3 3 85±3 30±3 4 Room temperature 15±3 No visible damage |ΔV /V |≤5% 1mA 1mA
High Temperature Load Ambient Temp: 85±2℃ Duration: 1000hrs Load: Max. Allowable Voltage In AC eara. |ΔV /V |≤10% 1mA 1mA
Damp Heat Load Ambient Temp: 40±2℃, 90~95% R.H. Duration: 1000hrs Load: Max. Allowable Voltage No visible damage |ΔV /V |≤10% 1mA 1mA
Voltage Proof Metal balls method, 2500Vac 1 min. No visible damage
Step Temperature (℃) Period (minutes)
1 -40±3 30±3
2 Room temperature 15±3
3 85±3 30±3
4 Room temperature 15±3

Page 8

8

PDF page 8 diagram

Aug 03, 2022 V.3Maximum Leakage Current and Maximum Clamping Voltage Curve

Page 9

PDF page 9 diagram

Maximum Surge Current Derating Curve

PDF page 9 diagram

Page 10

PDF page 10 diagram

Soldering Recommendation

PDF page 10 diagram

Marking code

PDF page 10 diagram

Quantity

Packaging Dimensions (Unit: mm) Quantity
Bulk Max. 160 66 Max. 252 Max. 200pcs/bag 2bags/box

Page 11

Product specification

Circuit Protection Components

LEGAL DISCLAIMER

YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice.

YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum exten t permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability.

YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy-related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data-processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, Traffic signal equipment, Transportation equipment and

Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.

Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.