1472621 FESTO
Document overview
- PDF pages: 2
Technical content
Page 1
Electric actuator EPCO-40-150-12.7P-ST-E
Part number: 1472621

Data sheet
| Feature | Value |
| Size | 40 |
| Stroke | 150 mm |
| Stroke reserve | 0 mm |
| Piston rod thread | M10x1.25 |
| Reversing backlash | 100 µm |
| Step angle with full step | 1.8 deg |
| Step angle tolerance | ±5% |
| Screw diameter | 12.7 mm |
| Spindle pitch | 12.7 mm/U |
| Max. angle of rotation of the piston rod +/- | 1 deg |
| Mounting position | Any |
| Piston rod end | External thread |
| Motor type | Stepper motor |
| Structural design | Electric actuator with ball screw drive |
| Spindle type | Ball screw drive |
| Protection against torsion/guide | With plain-bearing guide |
| Rotor position sensor | Incremental encoder |
| Rotor position sensor interface | RS422 TTL A/B channels + zero index |
| Rotor position sensor measuring principle | Optical |
| Max. acceleration | 10 m/s² |
| Max. speed | 0.46 m/s |
| Repetition accuracy | ±0.02 mm |
| Duty cycle | 100% |
| Insulation protection class | B |
| Nominal operating voltage DC | 24 V |
| Motor nominal current | 4.2 A |
| Certification | RCM compliance mark c UL us - Recognized (OL) |
| CE marking (see declaration of conformity) | As per EU EMC directive |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| Storage temperature | -20 °C ... 60 °C |
| Relative air humidity | 0 - 85 % Non-condensing |
| Degree of protection | IP40 |
| Ambient temperature | 0 °C ... 50 °C |
5/16/22 - Subject to change - Festo SE & Co. KG
1/2
Page 2
| Feature | Value |
| Impact energy in the end positions | 4.0E-4 J |
| Max. torque Mx | 0 Nm |
| Max. torque My | 3.3 Nm |
| Max. torque Mz | 3.3 Nm |
| Max. feed force Fx | 250 N |
| Guide value for payload, horizontal | 40 kg |
| Guide value for payload, vertical | 20 kg |
| Mass moment of inertia JH per meter of stroke | 0.167 kgcm² |
| Mass moment of inertia JL per kg of payload | 0.0409 kgcm² |
| Mass moment of inertia JO | 0.3375 kgcm² |
| Moving mass at 0 mm stroke | 415 g |
| Additional weight per 10 mm stroke | 55 g |
| Basic weight with 0 mm stroke | 2585 g |
| Additional moving mass per 10 mm stroke | 4.9 g |
| Electrical connection technology | Plug |
| Type of mounting | With internal thread With accessories |
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Cover material | Wrought aluminum alloy Smooth anodized |
| Housing material | Wrought aluminum alloy Smooth anodized |
| Piston rod material | High-alloy stainless steel |
| Spindle nut material | Steel |
| Spindle material | Roller bearing steel |
| Material of cylinder barrel | Wrought aluminum alloy Smooth anodized |
5/16/22 - Subject to change - Festo SE & Co. KG
2/2