1456569 PHOENIX

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 7

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Bus system flush-type socket, with green contact carrier, 4-pos., M12 SPEEDCON, shielded, D- coded, rear/screw mounting with M16 thread, with straight solder connection Your advantages Easy PCB assembly: one-piece connectors for wave soldering• All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission reliability: optional shield connection to the housing by means of shield contact Commercial data Item number 1456569 Packing unit 20 pc Minimum order quantity 20 pc Sales key AB26 Product key ABQEHB Catalog page Page 90 (C-2-2013) GTIN 4046356617192 Weight per piece (including packing) 14.195 g Weight per piece (excluding packing) 14.195 g Customs tariff number 85366990 Country of origin DE SACC-DSI-FSD-4CON-L180/SH GN - Device connector rear mounting 1456569 https://www.phoenixcontact.com/us/products/1456569 Jan 22, 2025, 1:45 AM Page 1 (7)

Notes on operation The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Order information: Lock nut is included in the scope of delivery Mounting Mounting type Rear mounting Pg9 With flat nut Assembly note With flat nut Product properties Product type Circular connectors (device side) DataApplication Signal Number of positions 4 Shielded yes Coding D Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Dimensions 6 mmLength of the solder pin 6 mm Material specifications Flammability rating according to UL 94 V0 Seal material NBR Material of grip body Zinc die-cast, nickel-plated Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Electrical properties Rated surge voltage 2.5 kV Contact resistance ≤ 3 mΩ SACC-DSI-FSD-4CON-L180/SH GN - Device connector rear mounting 1456569 https://www.phoenixcontact.com/us/products/1456569 Jan 22, 2025, 1:45 AM Page 2 (7)

Insulation resistance ≥ 100 MΩ Nominal voltage UN 250 V Nominal current IN 4 A Connection data Conductor connection Connection method Solder pins Contact connection type Socket Tightening torque 3 Nm ... 4 Nm (Installation-side) Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding D Environmental and real-life conditions Ambient conditions IP67 (When plugged in) IP65 (When plugged in) Degree of protection IP65/IP67 -40 °C ... 70 °C (Plug / socket) -50 °C ... 70 °C (Cable, flexible installation) Ambient temperature (operation) -20 °C ... 60 °C (cable, fixed installation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 SACC-DSI-FSD-4CON-L180/SH GN - Device connector rear mounting 1456569 https://www.phoenixcontact.com/us/products/1456569 Jan 22, 2025, 1:45 AM Page 3 (7)

Pin assignment M12 socket, 4-pos., D-coded, female side SACC-DSI-FSD-4CON-L180/SH GN - Device connector rear mounting 1456569 https://www.phoenixcontact.com/us/products/1456569 Jan 22, 2025, 1:45 AM Page 4 (7)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1456569  UL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

250 V 4 A 22 - 22 -

 cULus Recognized Approval ID: E221474-20140616 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2

250 V 4 A - -

SACC-DSI-FSD-4CON-L180/SH GN - Device connector rear mounting 1456569 https://www.phoenixcontact.com/us/products/1456569 Jan 22, 2025, 1:45 AM Page 5 (7)

ECLASS-13.0 27440109 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 SACC-DSI-FSD-4CON-L180/SH GN - Device connector rear mounting 1456569 https://www.phoenixcontact.com/us/products/1456569 Jan 22, 2025, 1:45 AM Page 6 (7)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS EFUP-50Environment friendly use period (EFUP) An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP a19c31d5-6e6e-4b39-a1f0-bb6559598e5a Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com SACC-DSI-FSD-4CON-L180/SH GN - Device connector rear mounting 1456569 https://www.phoenixcontact.com/us/products/1456569 Jan 22, 2025, 1:45 AM Page 7 (7)