1456527 PHOENIX
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 9
Technical content
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 1 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bus system flush-type socket, with water blue contact carrier, 4-pos., M12 SPEEDCON, shielded, D-coded, rear/screw mounting with M16 thread, with straight solder connection Your advantages Easy PCB assembly: one-piece connectors for wave soldering All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design For high transmission reliability: optional shield connection to the housing by means of shield contact Key Commercial Data Packing unit 20 pc GTIN GTIN 4046356617185 Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C (cable, fixed installation) Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4 A Rated voltage 250 V Rated surge voltage 2.5 kV
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 2 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Technical data General Number of positions 4 Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Ethernet CAT5, 100 Mbps Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles ≥ 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting Pg9 With flat nut Transmission characteristics (category) CAT5 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Standards/specifications M12 connector IEC 61076-2-101 Transmission characteristics (category) CAT5 (IEC 11801:2002) Standards and Regulations Standards/specifications M12 connector IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 3 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Dimensional drawing M12 front view
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 4 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Drilling diagram
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 5 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Dimensional drawing M12 flush-type connector
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 6 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Dimensional drawing Housing cutout for M16 fastening thread, mounting panel with feed-through hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm)
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 7 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Schematic diagram Pin assignment M12 socket, 4-pos., D-coded, female side Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27140800 eCl@ss 4.1 27140800 eCl@ss 5.0 27143400 eCl@ss 5.1 27143400 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 8 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Classifications ETIM ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals UL Recognized / EAC / cULus Recognized Ex Approvals Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 118976 Nominal voltage UN 250 V Nominal current IN 4 A mm²/AWG/kcmil 22 EAC B.01687
https://www.phoenixcontact.com/pi/products/1456527 09/11/2020 Page 9 / 9 Flush-type connector - SACC-DSI-FSD-4CON-L180/SH TQ - 1456527 Approvals cULus Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E221474-20140616 Nominal voltage UN 250 V Nominal current IN 4 A mm²/AWG/kcmil 22-20 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com