1402137 PHOENIX

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 10

Technical content

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 1 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 5-pos., M12 SPEEDCON, A-coded, rear/screw mounting with M12 thread, with 0.6 m TPE litz wire, 5 x 0.34 mm² Key Commercial Data Packing unit 1 pc Minimum order quantity 100 pc GTIN GTIN 4046356584906 Technical data Dimensions Length of cable 0.6 m Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4 A Rated voltage 60 V Number of positions 5 Insulation resistance ≥ 100 MΩ Coding A - standard Signal type/category Universal Status display No

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 2 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Technical data General Overvoltage category II Degree of pollution 3 Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Black, brown,blue, white, gray Material conductor insulation TPE Conductor material Tin-plated Cu litz wires Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Standards and Regulations Flammability rating according to UL 94 V0 Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 3 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Technical data Standards and Regulations

  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product
  • Only use tools recommended by Phoenix Contact
  • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
  • Ensure that the protective or functional ground has been properly connected. applicable when combining several circuits in a cable and/or connector
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 4 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Dimensional drawing Housing cutout for M12 fastening thread, mounting panel with thread

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 5 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Dimensional drawing Housing cutout for M12 fastening thread, mounting panel with feed-through hole (alternative with surface as protection against rotation)

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 6 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Diagram I = current strength, T = ambient temperature

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 7 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Dimensional drawing M12 flush-type connector

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 8 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Circuit diagram Contact assignment of the M12 plug and the M12 socket

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 9 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Schematic diagram Pin assignment M12 male connector, 5-pos., A-coded, male side Classifications eCl@ss eCl@ss 10.0.1 27440102 eCl@ss 4.0 27260700 eCl@ss 4.1 27260700 eCl@ss 5.0 27260700 eCl@ss 5.1 27260700 eCl@ss 6.0 27279200 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102

https://www.phoenixcontact.com/pi/products/1402137 09/11/2020 Page 10 / 10 Panel feed-through - SACC-DSI-MS-5P-M12/0,6 PVCS0,5 - 1402137 Classifications ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002599 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31261501 UNSPSC 7.0901 31261501 UNSPSC 11 31261501 UNSPSC 12.01 31261501 UNSPSC 13.2 39121413 UNSPSC 18.0 39121413 UNSPSC 19.0 39121413 UNSPSC 20.0 39121413 UNSPSC 21.0 39121413 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC B.01687 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com