14-522_0360 EAO

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

https://www.eao.com/p/14-522.0360 Actuator 14- 522.0360

Your product: 14-522.0360 Actuator FRONT MOUNTING OPERATING-/INDICATION PART

ELECTRICAL CHARACTERISTICS

Front form: Front bezel colour: Front bezel material: Panel mountingMounting type: Black plastic short Lever colour: Lever material: Lever shape:

1 NC / 1 NO

42 V @ 0,1 A

3000 VAC, 50 Hz, 1 min. between all terminals and earth, according to EN/IEC 61058-1 ll Switching voltage and switching current: 100 mA at 42 VAC/VDC Contacts: Switching rating: Electric strength: Protection class: Universal terminal, 2 x 0.5 mmTerminal: Contact material:

This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC. Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible. Special features are the long life, extremely short rebound time and stable contact resistance. 2 positions 90° right 1 Mil. cycles of operation

3 N … 4 N, depending on the number of switching elements

Fixing nut max. 0.25 Nm The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals. For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in. Max. wire diameter 2 wires of 1 mm Max. wire cross-section of stranded cable 2 x 0.75 mm² 0.025 kg Switching action: Switching system: Switching system: Switching positions: Switching angle: Mechanical lifetime: Operating force: Tightening torque: Terminal details 1: Wire cross section: Weight: IP67, according to DIN EN 60529 – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely – 40 °C … + 85 °C Max. 150 m / s², pulse width 11 ms, 3-axis, (semi-sinusoidal as per EN IEC 60068- 2-27) IP front protection: Operating temperature: Storage temperature: Shock resistance: 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD) REACH compliant RoHS compliant Conformities: REACH: RoHS: Actuator, non illuminative, Black, short, Round, Nature, Aluminium, anodised, 1 NC / 1 NO, Rest - Maintained, Universal terminal, 2 x 0.5 mm, IP67, according to DIN Short Description:

The colour of anodised aluminium parts can vary due to technical production reasons Hints: Switching positions: Wiring diagrams: Component layouts: A = Terminals (rear side) B = Anti twist device C = Diode block D = Drilling plan (component side) Mounting cut-outs: Dimension drawings:

A = Solder terminal B = Plug-in terminal 2.8 x 0.5 mm C = Universal terminal 2.0 mm x 0.5 mm A = Solder terminal B = Plug-in terminal 2.8 x 0.5 mm C = Universal terminal 2.0 mm x 0.5 mm