1339319 PHOENIX

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 11

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M23, Device connector front mounting, series: M23 PRO, straight, for standard and ONECLICK fast locking system, No. of pos.: 7, Direction of rotation: Standard, contact connection type: Pin, Solder connection, 4x Ø2,7, flange dimensions: 26 mm x 26 mm, coding: N, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb <0.1%) Your advantages Solutions with cross-manufacturer compatibility for standard and fast locking systems• Modern, consistent design for highly convenient operation All housing can be fitted with pin or socket contacts Safe use in the field, thanks to high degree of protection Commercial data Item number 1339319 Packing unit 1 pc Minimum order quantity 1 pc Product key ABRABL GTIN 4063151644628 Weight per piece (including packing) 47 g Weight per piece (excluding packing) 47 g Country of origin DE M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 1 (11)

General Please observe the derating curve. General Please observe the derating curve. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to Safety note M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 2 (11)

warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Product properties Product type Circular connectors (device side) Material specifications Flammability rating according to UL 94 V0 Connector Insulating body Coding N Insulation body material PA 6.6 Insertion/withdrawal cycles 100 Connection method Solder connection Contact switching type Pin Application Signal Number of positions 7 Direction of rotation Standard Connection profile 7 Contact diameter Signal contacts 2 mm Litz wire cross-section Signal contacts min. 0.08 mm² Litz wire cross-section Signal contacts max. 2.5 mm² Nominal current per signal contact 20 A Note for max. connection cross section Rated voltage Signal contact 300 V Rated surge voltage 2.5 kV Overvoltage category II Degree of pollution 3 Installation height 2000 m Housing Housing material GD-Zn Flange dimensions 26 mm x 26 mm Type of locking for standard and ONECLICK fast locking system Degree of protection (plugged in) IP66 / IP68 (2m / 24h) / IP69K Thread type M23 Environmental and real-life conditions Ambient conditions Degree of protection IP68 Ambient temperature (operation) -40 °C ... 105 °C (see to derating) Permanent temperature 125 °C (DIN EN 60512-9-2 / 1000 h) M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 3 (11)

127,05 M23 25,7 19,8 4x Ø2,75 Dimensional drawing M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 4 (11)

N PO3 Connector pin assignment M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 5 (11)

Ø 0,1 A 4xM2,5 Ø20,1 +0,1 A ±0,5 19,8 -0,2 Rz16 area for Rz16 A-A Installation dimensions M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 6 (11)

ECLASS-11.0 27440109 ECLASS-12.0 27440109 ECLASS-13.0 27440109 ETIM ETIM 9.0 EC003569 UNSPSC UNSPSC 21.0 39121400 M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 7 (11)

Environmental product compliance Environmentally friendly use period: unlimited = EFUP-eChina RoHS No hazardous substances above threshold values M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 8 (11)

RC-Z2104 - Metal protective cap 1604260 https://www.phoenixcontact.com/us/products/1604260 Metal protective cap, M23, degree of protection: IP67, series: RC, Alternative product in accordance with RoHS II without Exemption 6c (Pb <0.1%) item no.: 1241739 PROT-M23PRO-OT-IP20 - Plastic protective cap 1055753 https://www.phoenixcontact.com/us/products/1055753 Plastic protective cap, M23, degree of protection: IP20, series: M23 PRO M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 9 (11)

PROT-M23PRO-OT-IP67 - Plastic protective cap 1055749 https://www.phoenixcontact.com/us/products/1055749 Plastic protective cap, M23, degree of protection: IP67, series: M23 PRO Signal M23PRO-VIB-ORING-OR - Sealing ring 1521137 https://www.phoenixcontact.com/us/products/1521137 Vibration O-ring, optional accessory for M23 PRO device connectors M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 10 (11)

M23PRO-VIB-ORING-GN - Sealing ring 1521138 https://www.phoenixcontact.com/us/products/1521138 Vibration O-ring, optional accessory for M23 PRO device connectors Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com M23-07P1N12WB00S - Device connector front mounting 1339319 https://www.phoenixcontact.com/us/products/1339319 Jan 15, 2024, 7:28 AM Page 11 (11)