1326011 PHOENIX

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 9

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. M23, Cable connector, series: M23 PRO, straight, shielded: yes, Screw locking mechanism, No. of pos.: 16+3, Direction of rotation: Standard, contact connection type: Pin, Crimp connection, cable diameter range: 6 mm ... 10 mm, coding: N, Item is lead-free in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) Your advantages Solutions with cross-manufacturer compatibility for standard and fast locking systems• Crimping connection: vibration- and temperature-resistant assembly Reliable under the harshest conditions: cable connectors with vibration brake Modern, consistent design for highly convenient operation Easy, cost-effective cable assembly: uniform shielding of M17 to M40 Commercial data Item number 1326011 Packing unit 1 pc Minimum order quantity 1 pc Sales key AB30 Product key ABRABA GTIN 4063151616397 Weight per piece (including packing) 117 g Weight per piece (excluding packing) 100.86 g Customs tariff number 85389099 Country of origin DE M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 1 (9)

Order information: Order crimp contacts 16 x Ø 1 mm, 3 x Ø 1.5 mm separately Order information: Please observe the derating curve. Safety note WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.

  • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
  • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
  • The products are suitable for applications in plant, controller, and electrical device engineering.
  • When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
  • Assembled products may not be manipulated or improperly opened.
  • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
  • When using the product in direct connection with third-party manufacturers, the user is responsible.
  • For operating voltages > 50 V AC, conductive connector housings must be grounded
  • Ensure that the protective or functional ground has been properly connected. are applicable when combining several circuits in a cable and/or connector
  • Only use tools recommended by Phoenix Contact
  • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product.
  • Operate the connector only when it is fully plugged in and interlocked.
  • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
  • Observe the minimum bending radius of the cable. Lay the cable without twisting it.
  • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to Safety note M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 2 (9)

warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Material specifications Flammability rating according to UL 94 V0 Connector Insulating body Coding N Material (Insulating body) PA 6.6 Connection method Crimp connection Contact switching type Pin Application Signal Number of positions 19 Direction of rotation Standard Connection profile 16+3 Installation height 2000 m Number Contact (Contact group 1) 3 Diameter Contact (Contact group 1) 1.5 mm Litz wire cross-section min. Contact (Contact group 1) 0.08 mm² Litz wire cross-section max. Contact (Contact group 1) 1 mm² Rated current Contact (Contact group 1) 10 A (for max. connection cross section) Rated voltage Contact (Contact group 1) 50 V Rated surge voltage 0.8 kV Overvoltage category III Degree of pollution 3 Number Contact (Contact group 2) 16 Diameter Contact (Contact group 2) 1 mm Litz wire cross-section min. Contact (Contact group 2) 0.08 mm² Litz wire cross-section max. Contact (Contact group 2) 1 mm² Rated current Contact (Contact group 2) 8 A (for max. connection cross section) Rated voltage Contact (Contact group 2) 50 V Rated surge voltage 0.8 kV Overvoltage category III Degree of pollution 3 Housing Type Cable connector housing Thread type M23 Design straight Type of locking Screw locking mechanism Pg screw connection none Housing material GD-Zn Degree of protection (plugged in) IP66/IP68 (2 m / 24 h) IP69K M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 3 (9)

External cable diameter 6 mm ... 10 mm Seal material FKM Environmental and real-life conditions Ambient conditions Ambient temperature (operation) -40 °C ... 105 °C (see to derating) Permissible humidity (storage/transport) 50 % ... 65 % Permanent temperature 125 °C (DIN EN 60512-9-2 / 1000 h) M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 4 (9)

Ø27,4 Ø27,4 58,1 Dimensional drawing, housing M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 5 (9)

N 17 18 PO 1415 Connector pin assignment M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 6 (9)

N 17 18 PO 1415 Connector pin assignment M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 7 (9)

ECLASS-13.0 27440116 ECLASS-15.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 8 (9)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com M23-19P1N8A8003 - Cable connector 1326011 https://www.phoenixcontact.com/us/products/1326011 Dec 4, 2025, 12:42AM Page 9 (9)