132 VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

www.vishay.com Vishay Spectrol Revision: 12-Apr-13 1 Document Number: 57096 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1 5/16" (33.3 mm) Low Cost Industrial Single Turn Wirewound, Bushing Mount Type Potentiometer

FEATURES

  • Suitable model for all industrial applications
  • Center tap available
  • Continuous rotation and mechanical stops both standard
  • Large electrical angle: 352° ± 2°
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 QUICK REFERENCE DATA Sensor type ROTATIONAL, single turn wirewound Output type Output by turrets Market appliance Industrial Dimensions 1 5/16" (33.3 mm) ELECTRICAL SPECIFICATIONS PARAMETER MIL-PRF-12934 TEST PROCEDURES APPLY STANDARD SPECIAL Total Resistance 5  to 20 k to 35 k Tolerance: 50  and Above ± 3 % ± 1 % Below 50  ± 5 % ± 3 % Linearity (independent) STANDARD BEST PRACTICAL Total Resistance 200  and above ± 0.5 % ± 0.25 % Noise 100  ENR Power Rating 40 °C ambient 2.75 W derated to zero at 125 °C Electrical Angle Continuous Rotation 352° ± 2° Stops 340° ± 5° Insulation Resistance 1000 M  minimum at 500 V DC Dielectric Strength 1000 V RMS, 60 Hz Absolute Minimum Resistance 1.0 % of total resistance or 0.5 W whichever is greater Minimum Voltage 0.5 % maximum Temperature Coefficient of Resistance Refer to standard resistance element data MATERIAL SPECIFICATIONS Housing Molded glass filled thermoplastic Rear Lid Glass filled thermoset plastic Shaft Stainless steel, non-magnetic Terminals Brass, plated for solderability, Non-passivated Mount Hardware Lockwasher Internal Tooth:  Panel Nut: Steel, nickel plated Brass, nickel plated ENVIRONMENTAL SPECIFICATIONS Vibration 15 g thru 2000 Hz Shock 50 g Salt Spray 48 h Rotational Life Shaft Revolutions 500 000 Operating Temperature Range - 55 °C to + 125 °C ORDERING INFORMATION/DESCRIPTION

132 B 0 0 20K BO10

FEATURES OHMIC VALUE PACKAGING 0. Continuous 2. Stops 0. Standard (end taps) 1. Center tap (within 5° of electrical center) Box of 10 pieces Other characteristics will be standard as described on this specification sheet. If special characteristics are required such as special linearity tolerance, special resistance tolerance, non-linear functions, etc., please state these on your order.

www.vishay.com Vishay Spectrol Revision: 12-Apr-13 2 Document Number: 57096 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 POWER RATING CHART SAP PART NUMBERING GUIDELINES

132 B 2 1 103 B10

2: With stops 1: With center tap 103: 10K Box of 10 pieces DIMENSIONS in inches (millimeters) MECHANICAL SPECIFICATIONS PARAMETER Rotation 360° (continuous ) or 340° ± 5° (stops) Bearing Type Sleeve Torque (maximums) STARTING 1.0 oz. - in (72 g - cm) RUNNING 0.7 oz.- in (50.40 g - cm) Runouts (maximums) Shaft Runout (TIR) 0.002" (0.05 mm) Pilot Dia. Runout (TIR) 0.003" (0.08 mm) Lateral Runout (TIR) 0.005" (0.13 mm) Shaft End Play 0.008" (0.20 mm) Shaft Radial Play 0.003" (0.08 mm) Weight 1.0 oz. maximum (28.35 g) Stop Strength 8.0 in - lbs (9.21 kg - cm) (stops version only) ± 0.0310.875 (22.22) Ø 0.4062 MTG. (10.32) + 0.0000 - 0.00200.032 (0.81) Ø 0.2497 (6.34) 0.030 MAX. (0.76) + 0.0000 - 0.0003 0.562 (14.27) 0.032 (0.81) 3/8 - 32 UNEF - 2A Ø 0.125 (3.18) 0.062 (1.57) MTG. SURFACE 0.062 (1.57) 0.625 (15.88) ± 0.015 0.187 (4.75) ± 0.015 ± 0.015 Ø 1.312 (33.32) 60° ± 0.015 Ø 0.500 (12.70) BC TOLERANCES: UNLESS OTHERWISE NOTED. DECIMALS ± 0.005 ANGLES ± 2° 0.375 (9.52) ± 0.015 ± 0.010 CW SCHEMATIC MODEL 132B/132-... MARKING Unit  Identification Units shall be marked with Vishay Spectrol name, model number, resistance and tolerance, linearity, terminal identification, and data code Applicable test procedures: MIL-R-12934. Example of a marking for a standard part: 132-0-0-103 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE IN °C RATED POWER IN W 6.0 5.0 4.0 3.0 2.0 1.0 RESISTANCE ELEMENT DATA RESISTANCE VALUES () RESO- LUTION (%) OHMS PER TURN MAXIMUM CURRENT AT 40 °C AMBIENT (mA) MAXIMUM VOLTAGE ACROSS COIL (V) WIRE TEMP. COEF. (ppm/°C) 5 0.419 0.021 742 3.71 800 10 0.327 0.032 524 5.24 800 20 0.280 0.056 371 7.42 800 50 0.290 0.145 234 11.7 20 100 0.251 0.251 166 16.6 20 200 0.212 0.424 122 24.4 20 500 0.161 0.806 74.2 37.1 20 1K 0.150 1.50 52.4 52.4 20 2K 0.132 2.64 37.1 74.2 20 5K 0.107 5.34 23.4 117 20 10K 0.080 7.98 16.6 166 20 20K 0.067 13.4 12.2 244 20 35K 0.057 20.0 8.88 311 20

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.