1319

1319T ETC1

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

• = High data rate capability: 10 Gbits/s : ee = APD or PIN photodetector - —_ - - : = Fully operational through the 1.3 um to 1.55 um . — — ae wavelength range - — Sy > - = Typical sensitivity: . | - —wWith APD, -26 dBm = oss £ ; yy Fo RY ~~ . = 23 GB typical dynamic range acy s > ___ « Single-mode fiber pigtail with FC/PC or SC optical — -~— | connector — r ~~ — ———— & Operating case temperature range: _ 2 ee 0°C to 65°C _ . . — / = 50 Q ac-coupled data output — —_. = Compact butterfly package with precision micro- ~~. wave K Connector* for data output The 1319T 10 Gbits/s Receiver is manufactured in a compact, icati 14-pin buttertly-lead package with a single-mode optical fiber Applications pigtail and a precision microwave coaxial connector for data access. = Line terminal equipment = High-speed networks up to 10 Gbits/s a SONET OC-192 and SDH STM-64 telecommuni- cations applications m Extended-reach datacom and telecom applications = Digital video * K Connectors a registered trademark of Wiltron Corporation.

. . Data Sheet 1319T OC-192/STM-64 Lightwave Receiver June 1998 Description Also available from Maxim Integrated Products, Sunny- vale, CA are the MAX1771 and MAX774 dc-dc switch- Receiver Operation ing converter ICs which can be used to build a high- voltage APD bias supply. The 1319T 10 Gbits/s fiber-optic receiver consists of a high-speed photodetector (APD or PIN) and a wide- . + band linear preamp in a pigtailed butterfly-lead metal Pin Information package. It is designed for use in single-mode, high- . age speed telecommunication applications at the SONET Table 1. Pin Descriptions 9.95328 Gbits/s. At 10 Gbits/s, the typical room temperature sensitivity Photodiode bias See eR eS acum forthe [3 [Ground APD version of the receiver and -18 dBm for the PIN 4 Vi Vi version of the receiver. The operating case temperature [4 ce (-5.2V) range for the receiver is 0 °C to 65 °C. [5 [Ground sd The receiver is manufactured in a compact, 14-pin but- ui emer terfly-lead package with a single-mode optical fiber pig- [7 [Ground tail and a precision microwave coaxial connector for [8 [Ground ——sCsizC data access. The fiber pigtail is internally beveled for [9 [Ground sid; low return loss and is available with ST®, SC, or FC-PC. The received data is ac-coupled (0.033 1F capacitor) through a precision microwave coaxial K Connector Voc (5 V) manufactured by Wiron Cam This connector SMA and 3.8 mm coaxial connectors but provides a L_CASE__ [Ground SMA and 3.5 mm coaxial connectors but provides a CASE Ground lower return loss than the standard connectors. Other * The thermistor is not available in the PIN version of the receiver. In coaxial connectors will be available in the future. 1319P-Type receivers, this pin will be open circuit internally. The receiver requires +5 V and —5 V power supplies for operation. The photodiode also requires a separate DATA OUT bias voltage: for the PIN, a nominal bias of +5 V at less = than 1 mA is required; for the APD, a nominal bias of = approximately +35 V is required. The APD bias supply GROUND 48 7 GROUND should be temperature compensated to match the GROUND —j9 6 > THERMISTOR* 0.2 %/°C gain vs. temperature performance of the APD GROUND —=j 10 5 => GROUND photodiode. The APD version of the receiver includes a GROUND = 11 4h -5.2V 3 kQ thermistor which can be used to monitor receiver GROUND —4 12 3 > GROUND case temperature and also as the feedback element for 45V 913 2. APD/PIN BIAS a temperature-compensated bias supply for the APD. NC 414 15 GROUND The 700B power module available from the Lucent ——— Technologies Power Systems Division is a de-de con- verter that converts +5 Vdc to an adjustable high- voltage output in the range required for the APD bias. The 700B uses the thermistor in the 1319T to providea Tess temperature-compensated output. Contact your local No connection for PIN versions (not connected internally) Lucent sales office for pricing and delivery. Figure 1. Pin Diagram 2 Lucent Technologies Inc.

Data Sheet | . June 1998 1319T OC-192/STM-64 Lightwave Receiver Handling Precautions Mounting and Connections The pigtail consists of a 41 in.+ 13 in. (1041 mm +330 mm), 8 um core, single-mode fiber. The 1319P PIN receiver pigtails have a 900 jum OD jacket diameter. The 1319T APD models have a 1200 ym OD jacket diameter. Both models of the receiver are available with FC/PC or SC optical connectors. Other connector options may be available. Contact your Lucent sales office for availabil- ity and ordering information. The fiber bending radius during operation and storage is 1.5 in. (38 mm) minimum. Electrostatic Discharge CAUTION: This device is susceptible to damage as a result of electrostatic discharge (ESD). Take proper precautions during both handling and testing. Follow guidelines such as JEDEC Publication No. 108-A. Although protection circuitry is designed into the device, take proper precautions to avoid exposure to ESD. Lucent employs a human-body model (HBM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the critical parameters used to define the model. A standard HBM (resistance = 1.5 kQ, capacitance = 100 pF) is widely used and, therefore, can be used for comparison purposes. The HBM ESD withstand voltage established for the 1319-Type receiver is +500 V. Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso- lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operations section of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. [Parameter [Stet [in ta [ at] Supply Voltage: Positive Supply Vec 58 Vv Negative Supply VEE 5.8 Vv Photodiode Supply Current: Forward* 20 mA Reverse 2 mA Optical Input Power:t APD PMaAX 2 dBm PIN PMaAX 5 dBm Operating Case Temperature [te [0 | 5 |e _| Storage Temperature [te 05 Lead Soldering Temperature ee Lead Soldering Time ee * Device is normally reverse biased. Forward biasing the photodiode may compromise device performance and reliability. + Under biased conditions. Unbiased, the maximum input optical power for both devices is +8 dBm. Lucent Technologies Inc. 3

1319T OC-192/STM-64 Lightwave Receiver June 1998 Qualification Tests The 1319-Type receiver has successfully passed the following qualification tests and meets the intent of Bellcore TR-NWT-000468. [eat eins YBa ie [Fare er [Physical Dimensions | _—‘MIL-STD-eeaC-2ore «| 80a tion 4 min./cycle, MIL-STD-883C-2007.1 MIL-STD-883C-1010.7 Humidity with Bias 4000 hours easmerenh | OS etiesiowsscroass || RSIS Bias MIL-STD-883C-1005.5 Optical Characteristics TA = 25 °C. [__Parameter | Symbol | Min | Typ | Max | Unit | [Optical Wavelength or Rated Sensiiviy |__| 12 |_— | 16 | um _ APD Version PLow -22 -24 dBm PIN Version PLow 15 -18 dBm PRBS, 3 x 10-1" BER): APD Version PHIGH 4 dBm PIN Version PHIGH 0 dBm [OpiicalRewrntoss——SSCSC~wSC SY Ce | | [Responsivy of APD, A= 155umM=10 | Faro | — | 75 | — | AW [Responsiviy of PIN, k= 1.55um,M=1 | RP | _— | as [| — | AW | [APD Gain t2Volage ——SSSCSCSC~<‘idCSC‘ «YS | CYC Cd [APD Breakdown Vorage Sr | dT (dT [Total Dark Curent ————SSSCSC~d SK | | Of | | [Temperature Coeficert of Gain 2 Vorage | — | — | 02 | — | %Fc_| 4 Lucent Technologies Inc.

Data Sheet | . June 1998 1319T OC-192/STM-64 Lightwave Receiver Optical Characteristics (continued) APD BIAS 45V (2) (13) 1002 0.033 pF 0.1 pF 100 pF _TL. Tes 1 ELECTRICAL = OUTPUT ONPoTY GTA. Apo IE oon ur >) PATA OUT a T 4 YT > 2 50Q 3kQ = 1 0.4 pF + THERMISTOR 52V GROUND se71b Figure 2. 1319-Type High-Speed Lightwave Receiver Schematic

Electrical Characteristics

Table 2. 1319 Receiver Thermistor Resistance (R) vs. Temperature (T)

Table 3. Electrical Characteristics

0 GHz—5 GHz 2 dB

5 GHz—10 GHz 3 dB

0 GHz—5 GHz +50

5 GHz—10 GHz +100

0 GHz—3 GHz <-15 dB

3 GHz—10 GHz <10 dB

}Transimpedance, Tz = —YPP where IPH(AVG) is the average photodiode current.

Figure 3. Circuit Diagram

1319T OC-192/STM-64 Lightwave Receiver June 1998 Outline Diagram Dimensions are in inches and (millimeters). am 0.600 0.100 (15.24) (2.54)

12 PLACES

a] LEAD7 LEAD 1 ooet “ae

4 HFAAAG ~F

Ho rh ht 0.125 (3.18) i DIA 4 I , (=== ©|| eze-298 I (25.35 + 0.25) -—-—f 0 DoOoRUORoOo RECEIVER SERIAL NUMBER, HABAAHE TRADEMARK, PRODUCT CODE, DATEMARK, AND APD BIAS: seer LEAD 14 VOLTAGES IN APPROX. 0.010 (028) Gz, AREA SHOWN THICKNESS 9.146 0.008 REF 0.012 (0.30) DIA (3.71 40.13) 14 PLACES. LEADS 0.326 (626) MAX STCONNECTOR SHOWN M3 METRIC THREAD HAaBAaga 0,100 (2.54) DEEP Do i 4 PLACES: es Phy | ¢ P —-F 0755 f 0.500 48.38) {--——- —=33 > ED i es es eH 4+. —_4 HASHARE OUT ooee0dq6 0.128 18) 0.100 0.500 8 Lucent Technologies Inc.

Data Sheet ; hr June 1998 1319T OC-192/STM-64 Lightwave Receiver

Ordering Information

STM.64 Lightwave ReceWer 1319TP [PN FC-PC 107913543 1319TS 107913568 Related Product Information 290EM- Type Laser Module | 10 Gbits/s Laser Module with Integrated Electro-Absorptive PS97-009LWP Modulator D2500P-Type Laser Module | Wavelength Selectable, Isolated DFB Laser Module with DS96-144LWP PMF Fiber 2410/2420-Type Modulator | LiNbOs Dual-Output Electro-Optic Modulator PN94-075LWP_ 26xx-Type Modulator LiNbOs SLIM-PAC Electro-Optic Modulator DS96-135LWP_ 1712-Type EDFA Erbium-Doped Fiber Amplifier (880 nm Pump Laser) DS96-086LWP_ 1713-Type EDFA Erbium-Doped Fiber Amplifier (1480 nm Pump Laser) DS96-134LWP_ 1718-Type EDFA Fiber Amplifier Gain Block (80 nm Pump Laser) DS95-233LWP Power Module (High-Voltage Output dc-dc Converter) DS95-182EPS Lucent Technologies Inc. 9