DHRS-25-A-NC FESTO
Document overview
- PDF pages: 2
Technical content
Page 1
Radial gripper DHRS-25-A-NC
Part number: 1310163

Data sheet
| Feature | Value |
| Size | 25 |
| Max. interchangeability | ≤0.2 mm |
| Max. opening angle | 180 deg |
| Rotational symmetry | ≤0.2 mm |
| Pneumatic gripper repetition accuracy | ≤0.1 mm |
| Type code | DHRS |
| Number of gripper jaws | 2 |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Radial |
| Gripping force backup | During closing |
| Design | Positively driven motion sequence |
| Position sensing | For proximity sensor |
| Symbol | 00991895 |
| Operating pressure | 4 bar ... 8 bar |
| Max. operating frequency of pneumatic gripper | ≤3 Hz |
| Min. opening time at 6 bar | 150 ms |
| Min. closing time at 6 bar | 96 ms |
| Operating medium | Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media | Operation with oil lubrication possible (required for further use) |
| Corrosion resistance class (CRC) | 1 - Low corrosion stress |
| Ambient temperature | 5 °C ... 60 °C |
| Mass moment of inertia | 0.71 kgcm² |
| Maximum force on gripper jaw Fz, static | 75 N |
| Maximum torque on gripper jaw, Mx static | 3.2 Nm |
| Maximum torque on gripper jaw, My static | 3.2 Nm |
| Maximum torque on gripper jaw, Mz static | 3.2 Nm |
| Product weight | 277 g |
| Type of mounting | With internal thread and centering sleeve Via through-hole and centering sleeve Optionally: |
| Pneumatic connection | M5 |
| Note on materials | RoHS-compliant |
| Cover cap material | PA |
| Housing material | Wrought aluminum alloy Hard-anodized |
12/16/20 - Subject to change - Festo AG & Co. KG
1/2
Page 2
| Feature | Value |
| Gripper jaw material | High-alloy steel |
12/16/20 - Subject to change - Festo AG & Co. KG
2/2