12T06HTW

12T_17 NELLSEMI

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

www.nellsemi.com Page 1 of 7 RoHS RoHS GA2 TRIACs, 12A Snubberless, Logic Level and Standard 1 2 3 TO-220AB (lnsulated) (12TxxAI) TO-220AB (non-Insulated) (12TxxA) SYMBOL IT(RMS)RMS on-state current (full sine wave) TO-263/TO-220AB ITSM Non repetitive surge peak on-state current (full cycle, T initial = 25°C)j A 2I t2I t Value for fusing 72 2A s dI/dt Critical rate of rise of on-state current I = 2xl , t ≤100nsG GT r IGMPeak gate current 4 PG(AV)Average gate power dissipation 1 TstgStorage temperature range Operating junction temperature range - 40 to + 150 - 40 to + 125 ºC A/µs A A W UNITVALUE 120 126 F =50 Hz F =60 Hz t = 20 ms t = 16.7 ms t = 10 msp F =100 Hz T =125ºCj T =125ºCj T =125ºCj T =20 µsp Tj ABSOLUTE MAXIMUM RATINGS PARAMETER TEST CONDITIONS TO-220AB insulated/TO-220F (ITO-220AB) T = 105ºCc T = 90ºCc G 2TO-263 (D PAK) (12TxxH)

FEATURES

APPLICATIONS

Low thermal resistance with clip bonding Low thermal resistance insulation ceramic for insulated TO-220AB package High commutation (4Q) or very high commutation (3Q) capability 12T series are UL certified (File ref: E320098) Packages are RoHS compliant ON/OFF or phase angle function in applications such as static relays, light dimmers and appliance motors speed controllers. The snubberless versions (with suffix W) are especially recommended for use on inductive loads, because of their high commutation performances. The 12T series provides an insulated tab (rated at 2500V ).RMS MAIN FEATURES SYMBOL VALUE UNIT IT(RMS) V /VDRM RRM IGT(Q1) 12 A V mA5 to 50 600 to 1000 TO-220F(ITO-220AB) (12TxxAF) 2(A2) 3(G) 1(A1)

C I - II - III IV MAX. 100 mA ALL ALL MAX. I - III - IV MAX. mA II MIN. MIN. (2)VTM MAX. Vt0(2) Threshold voltage MAX. Dynamic resistance MAX. IDRM IRRM MAX. mA Note 1: Minimum l is guaranted at 5% of l max.GT GT Note 2: For both polarities of A2 referenced to A1. QUADRANT 12Txxxx V = 12 V, R = 30ΩD L V = V , R = 3.3KΩ, T = 125°CD DRM L j I = 500 mAT I = 1.2 IG GT V = 67% V , gate open, T = 125°CD DRM j (dI/dt)c = 5.3 A/ms, T = 125°C j 1.3 0.2 V V mA V/µs V/µs 80 80 200 400 5 10 I = 17 A, t = 380 µsTM P T = 125°Cj T = 25°Cj T = 125°Cj T = 125°Cj T = 25°Cj 1.55 0.85 V V µA mΩ STATIC CHARACTERISTICS UNITVALUE UNITTEST CONDITIONS TEST CONDITIONS SYMBOL SYMBOL 12Txxxx Unit (1)IGT I - II - III VGT I - II - III VGD I - II - III (2)IH MAX. I - III MAX. mA II (2)dV/dt MIN. (2)(dI/dt)c MIN. A/ms- IL MAX. MIN. V = 12 V, R = 30ΩD L V = V , R = 3.3KΩD DRM L T = 125°Cj I = 100 mAT I = 1.2 IG GT V = 67% V gate open ,T = 125°CD DRM j, (dV/dt)c = 0.1 V/µs (dV/dt)c = 10 V/µs Without snubber T = 125°Cj T = 125°Cj T = 125°Cj MAX. 3.5 10 50 1.3 0.2 15 60 20 70 35 80 40 1000 6.5 2.9 12- mA V V mA V/µs TEST CONDITIONS QUADRANTSYMBOL TW SW BW 500 6.5 CW SNUBBERLESS and Logic level (3 quadrants) Standard (4 quadrants) (1)IGT VGT VGD (2)IH (2)dV/d t IL (2)(dV/dt)c (2)Rd B (T = 25 ºC unless otherwise specified)JELECTRICAL CHARACTERISTICS (T = 25 ºC unless otherwise specified)JELECTRICAL CHARACTERISTICS V = VD DRM V = VR RRM www.nellsemi.com Page 2 of 7 A 100 12T Series RoHS RoHS

VOLTAGE (xx) SENSITIVITY PACKAGE 600 V 50 mA 50 mA 25 mA 35 mA 10 mA 5 mA Note: xx = voltage, yy = sensitivity 1000 V 12TxxA-B/12TxxAl-B 12TxxA-BW/12TxxAl-BW 12TxxA-C/12TxxAl-C 12TxxA-CW/12TxxAl-CW 12TxxA-SW/12TxxAl-SW 12TxxA-TW/12TxxAI-TW TYPE TO-220AB Standard Snubberless Standard Snubberless Logic level Logic level V V V V V VV VV VV V 800 V V V V V V V THERMAL RESISTANCE Rth(j-c) Junction to case (AC) Rth(j-a) Junction to ambient 2.3 °C/W °C/W UNITVALUESYMBOL TO-220AB, TO-263 TO-220AB Insulated/TO-220F TO-220AB Insulated, TO-220AB, TO-220F 1.4 S = Copper surface under tab. 2S = 1 cm TO-263 25 mA 12TxxH-B Standard Standard V V V V V V V V V 12TxxH-C 12TxxH-SW AI: Insulated TO-220AB package Logic level 2D PAK

ORDERING INFORMATION

ORDERING TYPE MARKING PACKAGE WEIGHT ,BASE Q TY DELIVERY MODE TO-220AB 2.0g 50 Tube 12TxxAI-yy 12TxxAI-yy 2.3g 50 Tube 12TxxH-yy 12TxxH-yy 2TO-236(D PAK) 2.0g 50 TO-220AB (insulated) Tube 50 mA 5 mA 50 mA 25 mA 50 mA 12TxxH-CW 12TxxH-BW 12TxxH-TW 12TxxAF-B 12TxxAF-C 12TxxAF-BW TO-220F Snubberless Snubberless Logic level Standard Standard Snubberless V V V V V VV VV VV V V V V V V V 35 mA 10 mA 10 mA 12TxxAF-CW Logic level Snubberless V V V V V V V V V 12TxxAF-SW 12TxxAF-TW Logic level 50 mA 10 mA 35 mA (ITO-220AB) 12TxxAF-yy 12TxxAF-yy TO-220F(ITO-220AB) 2.5g 50 Tube www.nellsemi.com Page 3 of 7 12T Series RoHS RoHS

ORDERING INFORMATION SCHEME Triac series Current Voltage 12 = 12A 06 = 600V 08 = 800V B = 50mA Standard BW = 50mA Snubberless C = 25mA Standard CW = 35mA Snubberless SW = 10mA Logic Level TW = 5mA Logic Level

12 T 06 A - BW

10 = 1000V A = TO-220AB (non-insulated) AI = TO-220AB ( insulated) I Sensitivity GT 2H = TO-263 (D PAK) AF = TO-220F ( ITO-220AB, insulated) Fig.1 Maximum power dissipation versus RMS on-state current (full cycle) Fig.2 RMS on-state current versus case temperature (full cycle) P (W) I (A)T(RMS) 12510075502564 921 Fig.3 RMS on-state current versus ambient temperature (printed circuit board FR4, copper thickness: 35µm)(full cycle) Fig.4 Relative variation of thermal impedance versus pulse duration. 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 1E-3 1E-2 1E-1 1E+0 K=[Z /R ]th th 5E+21E+21E+11E+01E-11E-20 25 50 75 100 125 I (A)T(RMS) I (A)T(RMS) 10 11 128 ITO-220AB TO-220AB (insulated) TO-220AB TO-263 T (°C)C

2 D PAK

2(S=1cm ) T (°C)c tp(s) Zth(j-c) Zth(j-a) www.nellsemi.com Page 4 of 7 12T Series RoHS RoHS

I (A) Fig.5 On-state characteristics (maximum values). T max.j V = 0.85 Vto R = 35 mΩd T =T maxj j T =25°Cj V (V)TM 0 I (A)TSM Fig.6 Surge peak on-state current versus number of cycles. 1 10 100 1000 t=20ms One cycleNon repetitive T initial=25°Cj Repetitive T =90°Cc Number of cycles 100 110 120 130 100 1000 -40 -20 0 20 40 60 80 100 120 140 0.0 0.5 1.0 1.5 2.0 2.5 IGT I & IH L T (°C)j Fig.9 Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values). Fig.10 Relative variation of critical rate of decrease of main current versus (dV/dt)c (typical values). Fig.7 Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms.2 and corresponding value of l t. Fig.8 Relative variation of gate trigger current,holding current and latching current versus junction temperature (typical values). 2 2l (A), l t(A s)TSM l ,l ,l [T ] / l ,l ,l [T =25°C]GT H L j GT H L j 0.0 0.4 0.8 1.2 1.6 2.4 2.0 2.8 (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 (dI/dt)c [(dV/dt)c] / Specified (dI/dt)c 0.1 1.0 10.0 100.0 0.1 1.0 10.0 100.0 dI/dt limitation: 50A/µs T initial=25°Cj 2I t ITSM t (ms)p 0.01 0.10 1.00 10.00 SW CW/BW C B (dV/dt)c (V/µs) TW 4.5 5.0 (dV/dt)c (V/µs) www.nellsemi.com Page 5 of 7 12T Series RoHS RoHS

Fig.11 Relative variation of critical rate of decrease of main current versus junction temperature (dI/dt)c [T ] (dl/dt)c [T specified ]j j 0 4 8 12 2016 T (°C)j 0 25 50 75 100 125 2Fig.12 D PAK thermal resistance junction to ambient versus copper surface under tab (printed circuit board FR4, copper thickness: 35µm) Rth(j-a)(°C/W) 2D PAK 2S(cm ) 24 3228 36 40 Case Style 2.87 (0.113) 2.62 (0.103) 9.40 (0.370) 9.14 (0.360) 10.54 (0.415) MAX. 16.13 (0.635) 15.87 (0.625) PIN 4.06 (0.160) 3.56 (0.140) 1.45 (0.057) 1.14 (0.045) 2.67 (0.105) 2.41 (0.095) 2.65 (0.104) 4.95 (0.195) 0.90 (0.035) 0.70 (0.028) 3.91 (0.154) 3.74 (0.148) 1 32 4.70 (0.185) 4.44 (0.1754) 1.39 (0.055) 1.14 (0.045) 3.68 (0.145) 3.43 (0.135) 8.89 (0.350) 8.38 (0.330) 29.16 (1.148) 28.40 (1.118) 14.22 (0.560) 13.46 (0.530) 0.56 (0.022) 0.36 (0.014) 2.79 (0.110) 2.54 (0.100) 15.32 (0.603) 14.55 (0.573) TO-220AB 2TO-263(D PAK) 2.79 (0.110) 0.36 (0.014) 2.79 (0.110) 2.29 (0.090) 1.40 (0.055) 1.19 (0.047) 0 to 0.254 (0 to 0.01) 1.40 (0.055) 1.14 (0.045) 4.83 (0.190) 4.06 (0.160) 10.45 (0.411) 9.65 (0.380) 6.22 (0.245) 9.14 (0.360) 8.13 (0.320) 15.00 (0.591) 0.940 (0.037) 0.686 (0.027) 2.67 (0.105) 2.41 (0.095) 5.20 (0.205) 4.95 (0.195) 15.85 (0.624) 3.56 (0.140) 0.53 (0.021) www.nellsemi.com Page 6 of 7 2(A2) 3(G) 1(A1) 12T Series RoHS RoHS

3.3 3.1 13.7 13.5 All dimensions in millimeters 16.0 15.8 2.8 2.6 0.48 0.44 2.54 TYP 0.9 0.72.54 TYP 16.4 15.4 7.1 6.7 3.7 3.2 10.6 10.4 4.8 4.6 10° 2.85 2.65 3.4 3.1 www.nellsemi.com Page 7 of 7 2(A2) 3(G) 1(A1) 12T Series RoHS RoHS