DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 DRAWING NUMBER 12780 DATE: December 2012 STATSHIELD® BAG, SHIELDING, METAL-IN CONSTRUCTION, GREEN © 2012 DESCO INDUSTRIES INC. Employee Owned Side Weld Seals 3/8 in. (±0.10) Proprietary film - available only from Desco Industries Inc. Low Charging Static Dissipative Proprietary Outer Polyester Layer Aluminum Shielding Layer Low Charging Static Dissipative Proprietary Inner Polyethylene Layer The bag’s material meets the performance specification requirements of ANSI/ESD S541. Bag is free of amines, N-octanoic acid, and heavy metals. Statshield®, Statfree®, and Faraday® are Registered Trademarks of Desco Industries Inc. Mixed Unsortable Plastic Scrap Mixed unsortable plastic scrap shall contain assorted plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable into individual grades. Desco’s bags are recyclable STATSHIELD® METAL-IN SERIES LEAD-FREE AREA ESD SHIELDING BAG Specifications: Electrical Properties Typical Values Test Procedures/Method Surface Resistance: Outer Surface <10E11 ohms ANSI/ESD S11.11 Aluminum Layer <10E2 ohms ANSI/ESD S11.11 Inner Surface <10E11 ohms ANSI/ESD S11.11 Static Shielding <25 nJ ANSI/ESD S11.31 Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane Quartz: 0.01 nC/sq. in. Modified Incline Plane Capacitance Probe (to dissipate 1 KV) <30V ANSI/EIA 541/Appendix E, 1kV Discharge Physical Properties Bag Thickness: Thickness Nominal .0030” (.0762mm) ±10% ASTM D-2103 Width (Inside Dimensions) Nominal -0” / + .125” Length (Inside Dimensions) Nominal ± .125” Light Transmission (%) >40% (Tobias) ASTM D-1003 Heat Seal (lbs/in) >10 375°F, 1/2 sec 60 psi Seam Strength Pass ANSI/ESD S541 Tear Strength (lbs) >25 ASTM D-1004 Puncture Resistance (lbs) >10 ASTM D-2065 MVTR (gms / 100 in2 / 24 hrs, 100°F) <0.40 FTMS 101C/2065 OTR (cc / 100 in2 / 24 hrs) <6.1 ASTM D-1434 Abrasion Resistance >100 cycles Sutherland Abr. (.0000 Steel Wool) Outgassing Pass ASTM E595 Non-corrosive Pass MIL-STD-3010, M3005 Chemical Properties Corrosion No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel Polycarbonate Capability, Yes No Amines or N-Octanoic Acid Not present ANSI/ESD S541 Section 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation 2. Dissipative or conductive materials for intimate contact 3. A structure that provides electrostatic discharge shielding.” Made in the United States of America RoHS Compliance Statement None of the following materials are intentionally added in manufacturing this product: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in the Directive 2002/95/EC Article 4.1. See Desco Industries Inc. letter on-line at Desco.com