123109A BELDEN
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
© 2011 Belden, Inc. All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. peng: 06/15/12 REV. 5 123109A I. DESCRIPTION FOUR 22 AWG (7 X 30) TINNED COPPER FOAM HIGH DEN SITY POLY- ETHYLENE INSULATED TWISTED PAIRS WITH OVERALL BELDFOIL® AND 65% TINNED COPPER BRAID SHIELD, 22 AWG TINNED COPPER DRAIN WIRE BLACK PVC JACKET, INTERLOCKED ALUMINUM ARMOR, OVERALL PVC JACKET. II. ELECTRICAL CHARACTERISTICS MAX. OPERATING VOLTAGE: 300 V RMS MAX. CONTINUOUS CURRENT PER CONDUCTOR @ 25 DEG. C: 2.7 A NOMINAL CAPACITANCE BETWEEN CONDUCTORS @ 1 KHZ: 11.0 PF/FT . NOMINAL CAPACITANCE CONDUCTOR TO SHIELD @ 1 KHZ: * 20.9 PF/FT. NOMINAL IMPEDANCE @ 1MHZ: 120 OHM S NOMINAL CONDUCTOR DC RESISTANCE @ 20 DEG. C: 14.7 OHM S/1000 FT NOMINAL SHIELD DC RESISTANCE @ 20 DEG. C: 1.4 OHMS /1000 FT. NOMINAL VELOCITY OF PROPAGATION: 78% NOMINAL ATTENUATION @ 1 MHZ: .5 DB/10 0 FT. *ONE CONDUCTOR TO OTHER CONDUCTOR AND SHIELD III. PHYSICAL CHARACTERISTICS TEMPERATURE RATING: -25 TO +60 DEG. C INSULATION MATERIAL: DATALENE INNER JACKET MATERIAL: PVC TYPE SHIELD AND % COVERAGE: BELDFOIL®, 1 00% TC BRAID, 65% APPLICABLE SPECIFICATIONS (CORE): UL PLTC & CM CSA CM NOMINAL DIAMETER (CORE): .448"
© 2011 Belden, Inc. All Rights Reserved. Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. peng: IV. COLOR CODE PAIR #1: WHITE/BLUE & BLUE/WHITE PAIR #2: WHITE/ORANGE & ORANGE/WHITE PAIR #3: WHITE/GREEN & GREEN/WHITE PAIR #4: WHITE/BROWN & BROWN/WHITE AN INTERLOCKED ALUMINUM ARMOR AND PVC JACKET ARE APPLIED OVER THE BELDEN 3109A CORE. DIAMETER OVER ARMOR: .657" DIAMETER OVER PVC JACKET: .757" MIN. BENDING RADIUS: 9.6" NOM. WEIGHT/1000": 263 LBS. MAX. PULLING TENSION: 247 LBS. SPECIFICATIONS: CSA/UL TYP E CMG CSA HL BCD FLAME RATING: UL1581 VERTICAL TRAY CSA FT4 VERTICAL TRAY (70,000 BT U/HR)