DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Features

  • RoHS compliant, lead-free and halogen-free
  • Fast response to fault currents
  • Compact design saves board space
  • Low resistance
  • Low-profile
  • Compatible with high temperature solders Agency Approvals Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. 1210L Series RoHS AGENCY AGENCY FILE NUMBER E183209 R50119118 Additional Information Datasheet SamplesResources Samples

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/22/17 Surface Mount > 1210L Series Ambient Operation Temperature -40°C -20°C 0°C 20°C 40°C 50°C 60°C 70°C 85°C Part Number Hold Current (A) T emperature Rerating T emperature Rerating Curve -40 -30 -20 -100 10 20 30 40 50 60 70 80 85 10% 30% 50% 70% 90% 110% 130% 150% 170% Temperature (°C) Percentage of Rated Current Average Time Current Curves The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 0.01 0.1 100 1000 10000 100000 0.1 11 0 100 Time in Seconds Current in Amperes 0.01 0.1 100 1000 10000 100000 0.1 11 01 00 Current in Amperes Time in Seconds 0.01 0.1 100 1000 10000 100000 0.1 11 0 100 Current in Amperes Time in Seconds 1812L 0603L 250S 0805L OLD 1206L OLD 0.01 0.1 100 0.1 11 0 100 Current in Amperes Time in Seconds 0.01 0.1 100 1000 10000 100000 0.1 11 0 100 Current in Amperes Time in Seconds 0.04A 0.10A 0.20A 0.25A 0.35A 0.50A 0.10 100 1000 0.1 11 01 00 Current in Amperes Time in Seconds 0.13A 0.10A 0.20A 0.35A 0.50A 0.75A 1.00A 0.12A 0.16A 0.20A 0.25A 0.35A 0.35A/15V 0.50A 0.50A/15V 0.75A 1.0A 1.1A 1.5A 2.0A 0.10A 0.14A 0.20A 0.50A 0.75A/33V 0.75A/24V 0.75A 1.10A/16V 1.10A/33V 1.10A 1.25A 1.25A/6V 1.50A/12V 1.50A 1.50A/24V 1.60A/12V 1.60A 1.60A/8V 2.00A 2.60A 2920L 0.01 0.1 100 0.1 11 0 100 Current in Amperes Time in Seconds 0.16A 0.30A 1.00A/33v 1.00A 1.50A 2.00A 0.30A 0.50A 0.75A & 0.75A/60 1.00A 1.25A 1.50A 1.85A 2.00A/24V 2.50A 2.60A & 2.60A/24 3.00A/15V 5.00A/16V 0.01 0.1 100 1000 10000 100000 0.11 10 100 Current in Amperes Time in Seconds 2920L 0.10A 0.30A 0.50A .75A .75A/60 1.00A 1.25A 1.50A 1.85A 2.00A/24V 2.00A 2.50A 2.60A 3.00A/15V 3.00A 2016L OLD 0.01 0.1 100 1000 10000 0.1 11 01 00 Current in Amperes Time in Seconds 1210L OLD 0.05A 0.10A 0.20A 0.35A 0.50A 0.75A 1.10A 1.50A 1.75A 2.00A 0.01 0.10 1.00 10.00 100.00 0.101 .00 Time in Seconds 10.00 Current in Amperes 1210L 0.05A 0.10A 0.20A 0.35A 0.35A/30 0.50A 0.50A/30 0.75A 0.75A/24 1.10A 1.50A 1.50A/16 1.75A 2.00A 0.01 0.1 100 0.1 11 0 Time in Seconds Current in Amperes 2016L 0.30A 0.50A 0.75A/60 1.00A 1.00A/33 1.50A 2.00A 0.01 0.1 100 0.1 11 0 Time in Seconds Current in Amperes 1206L 0.12A 0.16A 0.20A 0.25A 0.35A, 0.35A/15V 0.50A, 0.50A/15V 0.75A 0.75A/13.2V 1.1A 1.5A 1.75A 2.0A 0805L 0.01 0.1 100 0.1 11 0 100 Current in Amperes Time in Seconds 0.10A 0.20A 0.35A 0.50A 0.75A 1.00A 1.10A 10.00 Note: The temperature rerating data is only for reference, please contact Littelfuse technical support for detail temperature rerating information. Note: Typical Temperature rerating curve, refer to table for derating data

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/22/17 Surface Mount > 1210L Series Environmental Specifications Soldering Parameters Operating/Storage T emperature -40°C to +85°C Maximum Device Surface T emperature in T ripped State 125°C Passive Aging +85°C, 1000 hours -/+5% typical resistance change Humidity Aging +85°C, 85, R.H.,1000 hours -/+5% typical resistance change Thermal Shock MIL–STD–202, Method 107 +85°C/-40°C, 20 times -30% typical resistance change Solvent Resistance MIL–STD–202, Method 215 No change Vibration MIL–STD–883, Method 2007 , Condition A No change Moisture Level Sensitivity Level 1, J–STD–020 Physical Specifications T erminal Material Solder-Plated Copper (Solder Material: Matte Tin (Sn)) Lead Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002 Category 3. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone tL to tP Profile Feature Pb-Free Assembly Average Ramp-Up Rate (TS(max) to TP) 3°C/second max Pre Heat: Temperature Min (Ts(min)) 150°C Temperature Max (Ts(max)) 200°C Time (Min to Max) (ts) 60 – 180 secs Time Maintained Above: Temperature (TL) 217°C Temperature (tL) 60 – 150 seconds Peak / Classification Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. -- All temperature refer to topside of the package, measured on the package body surface -- If reflow temperature exceeds the recommended profile, devices may not meet the performance requirements -- Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead -- Recommended maximum paste thickness is 0.25mm (0.010 inch) -- Devices can be cleaned using standard industry methods and solvents -- Devices can be reworked using the standard industry practices

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/22/17 Surface Mount > 1210L Series Dimensions Part Number A B C D E Inches mm Inches mm Inches mm Inches mm Inches mm Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max C Top View Pad Layout Side View Bottom View 2.50 mm (.098) 2.00 mm (.079) 1.00 mm (.040) D MARKING CODE VARIES WITH AMPERA GE RATING (See Electrical Characteristics Table) SHOWN IS 1.5AMP RATING E A B K K Part Ordering Number System PACKAGING STYLE SIZE L: LITTELFUSE SURFACE MOUNT PPTC I HOLD HOLD CURRENT CODE (Refer to Electrical Characteristics Table) /XX: SPECIAL VOLTAGE RATING (Not applicable to all parts. Refer to Electrical Characteristics Table) QUANTITY CODE: K=10,000 Y=4,000 W=3,000 P=2,000 R: Tape & Reel SERIES

1210 L 380 /12 TH Y R

(Not applicable to all parts) -A: Automotive grade Blank: Standard version - A

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/22/17 Surface Mount > 1210L Series Packaging Options Part Number Ordering Number Halogen Free I hold (A) I hold Code Packaging Option Quantity Quantity & Packaging Codes 1210L005 1210L005WR Ye s 0.05 005 Tape and Reel 3000 WR 1210L010 1210L010WR Ye s 0.10 010 Tape and Reel 3000 WR 1210L020 1210L020WR Ye s 0.20 020 Tape and Reel 3000 WR 1210L035 1210L035YR Ye s 0.35 035 Tape and Reel 4000 YR 1210L035/30 1210L035/30WR Ye s 0.35 035 Tape and Reel 3,000 WR 1210L050 1210L050YR Ye s 0.50 050 Tape and Reel 4000 YR 1210L050/30 1210L050/30WR Ye s 0.50 050 Tape and Reel 3,000 WR 1210L075 1210L075YR Ye s 0.75 075 Tape and Reel 4000 YR 1210L075/24 1210L075/24PR Ye s 0.75 075 Tape and Reel 2000 PR 1210L110/12 1210L110/12WR Ye s 1. 10 110 Tape and Reel 3,000 WR 1210L110/16 1210L110/16WR Ye s 1. 10 110 Tape and Reel 3,000 WR 1210L110TH 1210L110THYR Ye s 1. 10 110 Tape and Reel 4000 YR 1210L150/16 1210L150/16WR Ye s 1 .50 150 Tape and Reel 3,000 WR 1210L150TH 1210L150THWR Ye s 1 .50 150 Tape and Reel 3000 WR 1210L175 1210L175WR Ye s 1 .75 175 Tape and Reel 3000 WR 1210L200 1210L200PR Ye s 2.00 200 Tape and Reel 2000 PR TAPE SPECIFICATIONS: EIA-481-1 (mm) REEL DIMENSIONS: EIA-481-1 (mm) Packaging Code “YR”: 1210L035 1210L050 1210L075 1210L110TH Packaging Code “WR”: 1210L005 1210L010 1210L020 1210L035/30 1210L050/30 1210L110/12 1210L110/16 1210L150/16 1210L150TH 1210L175 Packaging Code “PR”: 1210L200 Packaging Code “PR”: 1210L075/24 Leader min. 390 390 390 390 Trailer min. 160 160 160 160 T ape and Reel Specifications

© 2017 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/22/17 Surface Mount > 1210L Series WARNING

  • Users shall independently assess the suitability of these devices for each of their applications
  • Operation of these devices beyond the stated maximum ratings could result in damage to the devices and lead to electrical arcing and/or fire
  • These devices are intended to protect against the effects of temporary over-current or over-temperature conditions and are not intended to perform as protective devices where such conditions are expected to be repetitive or prolonged in duration
  • Exposure to silicon-based oils, solvents, electrolytes, acids, and similar materials can adversely affect the performance of these PPTC devices
  • These devices undergo thermal expansion under fault conditions, and thus shall be provided with adequate space and be protected against mechanical stresses
  • Circuits with inductance may generate a voltage (L di/dt) above the rated voltage of the PPTC device. W CD H K0 B0D1 T F W E1P2 P0P1 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.