MJ20 EUROQUARTZ

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 1

Technical content

EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE 5 x 3.2 x 1.0mm SMD

DESCRIPTION

MJ crystals are miniature surface-mount crystals produced with a ceramic substrate and seam-welded metal lid. Their compact size and low mass make hem an ideal crystal for high-density applications. Miniature size: 5.0mm x 3.2mm x 1.0mm height Gold-plated ceramic base with metal seam-welded lid To minimize EMI the whole crystal may be grounded High shock and vibration resistance

  • Ideal for PDAs, GPS, PCMCIA, Wirles LAN etc.

FEATURES

OUTLINE & DIMENSIONS Frequency Range: 10.0MHz to 48.0MHz Mode: AT-Cut Fundamental Calibration Tolerance at 25ºC: from ±5ppm (±10, ±20 or ±30ppm standard) Frequency stability -10° to +60°C from ±5ppm -20° to +70°C from ±10ppm -40° to +90°C from ±15ppm Storage Temperature: -40°~+105°C Effective Series Resistance: See table Shunt Capacitance (C0): 2pF to 4pF typical, 5pF maximum Load Capacitance (CL): Series or from 10pF to 32pF ( Customer specified CL) Ageing: <±3ppm per year at +25°C Drive level: 100 mW maximum Reflow Soldering: 10s maximum at 260°C twice or 180s at 230°C, once. Package: Ceramic base, metal (Kovar) lid, Hermetic seal Packaging: 12mm EIA tape and reel 1000 pieces per reel SPECIFICATION 10.0 ~ 12.0 AT Fund. 80 12.0 ~ 16.0 AT Fund. 60 16.01~48.0 AT Fund. 50 Frequency Range MHz Crystal Cut/ Mode ESR Ohms Max. EQUIVALENT SERIES RESISTANCE (ESR) MJ CRYSTALS PART NUMBER GENERATION Part numbers for MJ crystals are generated as follows: 12.000MHz MJ/20/30/-10+60/18pF/60RExample: Nominal Frequency Package Calibration tolerance at 25°C (±ppm) Temperature Stability over temp. range (±ppm) Operating Temp. Range (°C) (Lower and upper limits) Load Capacitance (Either SR for series or CL in pF) Equivalent Series Resistance (Optional - use when special value is required) RoHS Status: Compliant Gross Leak: 1kg pressurized water immersion test as per Euroquartz procedures. Fine Leak: <5x10 -8 atm cc/s -helium leak test Shock: ±5ppm max. Free drop 3 times from 75cm height onto a hard wooden board or half sine wave acceleration of 100g peak amplitude for 11 ms duration, 3 cycles each plane. Vibration: ±5ppm max., frequency 10 to 55Hz, amplitude 1.5mm or 10g rms. Duration 6 hours. Solderability: MIL-STD-883, Method 2003 Humidity: 48 hours at 85°C, relative humidity, non-condensing Thermal Shock: Temperature cycling: Exposed to -40°C for 30 minutes then to +85°C for 30 minutes, - duration 5 days. ENVIRONMENTAL SPECIFICATION