12-22-BHR6C-A01-2C EVERLIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 11
Technical content
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 12-22 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc.
Applications
․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. D e v i c e S e l e c t i o n G u i d e Chip Type Material Emitted Color Resin Color BH InGaN Blue R6 AlGaInP Brilliant Red Water Clear
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 2 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 3 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage V R 5 V Forward Current I F BH:25 R6:25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP BH:100 R6:60 mA Power Dissipation Pd BH:95 R6:60 mW Electrostatic Discharge(HBM) ESD BH:150 R6:2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 4 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv BH R 6 18.0 22.5 28.0 30.0 ---- ---- mcd Viewing Angle 2θ1/2 ----- 120 ----- deg Peak Wavelength λp BH R 6 ----- 468 632 ----- nm Dominant Wavelength λd BH ---- ---- 470 624 ---- ---- nm Spectrum Radiation Bandwidth △λ BH R 6 ----- ----- nm Forward Voltage VF B H R 6 2.7 1.7 ----- ----- 3.1 2.2 V IF=5mA Reverse Current IR B H R 6 ----- ----- 50 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 5 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Typical Electro-Optical Characteristics Curves BH Relative luminous intensity Ambient Temperature T (°C -60 -20-40 0 20 6040 10080 100 %)( 1000 Relative luminous intensity( )% Wavelength λ(nm) Ta=25°C Forward Voltage V (V)F Forward Current I (mA) Ta=25°C Relative luminous intensity ( )% Forward Current I (mA) Ta=25°C Ambient Temperature T (°Ca ) Forward Current I (mA)
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 6 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Typical Electro-Optical Characteristics Curves Relative luminous intensity Ambient Temperature T (°C )a % )( Relative luminous intensity( )% Wavelength λ(nm) Ta=25°C Forward Voltage V (V)F Forward Current I (mA)Relative luminous intensity ( )% Forward Current I (mA) Ta=25°C Ambient Temperature T (°Ca ) Forward Current I (mA) Ta=25°C 0.5 0.3 0.1 0.7 0.8 0.9 1.0 40° 80° 0.60.2 0.4 90° 70° 60° 50° 10° 20° 30° Ta=25°C
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 7 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Label explanation CAT: L u m i n o u s I n t e n s i t y R a n k HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm RoHS Pb CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX CAT : XXX HUE : XXX REF : XXX EVERLIGHT MADE IN TAIWAN
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 8 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Polarity Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 9 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life I F = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 10 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 ℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
1 2 - 2 2 / B H R 6 C - A 0 1 / 2 C Everlight Electronics Co., Ltd. http://www.ever light.com Rev: 4 Page: 11 of 11 Device No: DSE-0003879 Prepared date:12-July.-2010 Prepared by: Yang yuanyuan 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 ℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiw an, R.O.C http://www.everlight.com